To Next PageTo Next Page
Need help?Do you have a question about the KROHNE OPTIFLUX 4300 C and is the answer not in the manual?
General| Type | Electromagnetic Flowmeter |
|---|---|
| Housing Material | Aluminum, Stainless Steel |
| Application | Water, Wastewater |
| Accuracy | ±0.2% of reading |
| Process Temperature | -40 °C to +130 °C |
| Lining Material | PTFE, PFA |
| Electrode Material | Stainless steel, Hastelloy |
| Output Signal | 4-20 mA, pulse |
| Power Supply | 24 V DC |
| Ingress Protection | IP67 |
| Material | Various materials depending on lining and electrodes |
Overview of the OPTIFLUX flowmeter system components and their identification.
Technical details and EEx markings for the OPTIFLUX 4300 flowmeter.
Technical details and EEx markings for the OPTIFLUX 5300 flowmeter.
Information and specifications for the IFC 300 signal converter.
Explanation of the data and markings present on device stickers.
Specifies maximum process and ambient temperature limits for OPTIFLUX 4300 variants.
Specifies maximum process and ambient temperature limits for OPTIFLUX 5300 variants.
Illustrates wiring configurations for DS300 and BTS300 cables.
Outlines equipotential bonding and cable entry requirements.
General safety warnings and procedures for electrical connection work.
Details available non-intrinsically safe signal inputs and outputs.
Details available intrinsically safe signal inputs and outputs.
General maintenance recommendations and inspection guidelines for flowmeters.
Procedure and specifications for safely replacing the mains fuse.
Guidelines and requirements for returning devices for service or repair.
General safety warnings specific to electrical connections for EEx versions.
Details available non-intrinsically safe signal inputs/outputs for EEx versions.
Details available intrinsically safe signal inputs/outputs for EEx versions.
