To Next PageTo Next Page
Need help?Do you have a question about the KROHNE OPTIMASS 3300C and is the answer not in the manual?
General| Type | Coriolis mass flowmeter |
|---|---|
| Measurement Principle | Coriolis |
| Protection Class | IP66/67 |
| Accuracy | ±0.1% of the measured value |
| Pressure Rating | Up to 100 bar |
| Output Signal | 4-20 mA, pulse, frequency |
| Communication Protocols | HART, Modbus |
| Materials | Stainless steel |
| Housing Material | Stainless steel |
| Approvals | ATEX, IECEx |
| Ambient Temperature Range | -40°C to +60°C |
| Power Supply | 24 VDC |
| Certifications | CE |
| Repeatability | ±0.05% of measured value |
Defines the purpose and application of the OPTIMASS 3000 mass flowmeter.
Outlines legal requirements for the manufacturer and end-user regarding the PED.
Explains the meaning of various safety symbols and warnings used in the manual.
Provides essential safety guidelines for personnel operating the device.
Illustrates correct and incorrect methods for handling and lifting the mass flowmeter to prevent damage.
Emphasizes using the base plate for support and warns against using pipework.
Lists crucial safety precautions for working on electrical connections, including power disconnection.
Explains the Coriolis effect and how the OPTIMASS 3000 measures mass flow using a Z-shaped tube.
Provides a summary of key technical specifications including measuring principle, application range, accuracy, and stability.
Details operating conditions, fluid properties, protection categories, and materials used for meter construction.
Specifies ATEX and other hazardous area certifications for different device configurations and conditions.
Presents a graph and explains how measuring error is derived from accuracy and zero stability under reference conditions.
Provides guidance on operating limits and a pressure/temperature de-rating chart for metric units.
