To Next PageTo Next Page
Need help?Do you have a question about the KROHNE OPTIMASS 7000 and is the answer not in the manual?
General| Measurement Principle | Coriolis |
|---|---|
| Type | Mass flow meter |
| Output Signal | 4-20 mA, pulse, frequency |
| Housing Material | Stainless steel |
| Tube Material | Stainless steel |
| Accuracy | ±0.1% of rate |
| Process Temperature | -196 to +200 °C |
| Pressure Rating | Up to 100 bar |
| Communication Protocols | HART, Modbus |
| Approvals | ATEX, IECEx, PED |
| Power Supply | 24 VDC |
| Protection Class | IP66/IP67 |
Defines the purpose and application scope of the mass flowmeter.
General safety guidelines for installation, commissioning, and operation.
Illustrates correct and incorrect methods for lifting and carrying the meter using slings.
Illustrates various mounting positions (horizontal, vertical, angled) and recommendations.
Provides guidelines for hygienic installations, including self-draining and cleaning fluid flow.
Provides critical safety warnings for working with electrical connections and hazardous areas.
Explains the Coriolis mass flowmeter's operating principle with diagrams.
Details measuring system, design, accuracy, reference conditions, and temperature/pressure effects.
