Need help?Do you have a question about the KROHNE OPTISONIC 3400 and is the answer not in the manual?
General| Type | Ultrasonic Flowmeter |
|---|---|
| Measuring Principle | Transit time difference |
| Typical Applications | Water, wastewater, chemicals |
| Accuracy | ±1% of measured value |
| Process Temperature | -40 to +160 °C |
| Temperature Range | -40 to +160 °C |
| Process Pressure | Up to 40 bar / 580 psi |
| Pressure Rating | Up to 40 bar / 580 psi |
| Output Signal | 4-20 mA, pulse |
| Communication | Modbus |
| Housing Material | Stainless steel |
| Power Supply | 24 V DC |
| Protection Class | IP68 |
| Ambient Temperature | -40 to +60 °C |
| Approvals | ATEX, IECEx |
Explains hazard symbols and their meanings for safe operation of the device.
Provides instructions for safe installation, assembly, and maintenance by trained personnel.
Specifies recommended inlet/outlet lengths and conditions for bends and T-sections.
Guides on mounting procedures, flange deviation limits, and orientation.
Emphasizes safety when working with electrical connections, including hazardous areas.
Outlines requirements and safety warnings for connecting the device to the mains power.
Overview of available input/output combinations for the signal converter.
Provides detailed dimensions and weights for standard flow sensor variants.
Lists dimensions and weights for XXT, High Viscosity, and Cryogenic sensor versions.
To Next Page
