GB-9
IC 50..E
Power consumption: terminals 1, 2 and 5: 16VA
at 60Hz, 13 VA at 50Hz,
terminal 3: 19 VA at 60Hz, 16 VA at 50Hz,
in total not exceeding: 19 VA at 60 Hz, 16 VA at
50Hz.
Feedback output: electrically isolated, max.500Ω
load impedance.
The output is always active when mains voltage is
applied to terminal3.
Input: electrically isolated,
4 (0) – 20mA: load impedance switchable be-
tween 50Ω and 250Ω,
0 – 10V: 100 kΩ input resistance.
Logistics
Transport
Protect the unit from external forces (blows, shocks,
vibration). On receipt of the product, check that the
delivery is complete, see page2 (Part designa-
tions). Report any transport damage immediately.
Storage
Store the product in a dry and clean place.
Storage temperature: see page8 (Technical data).
Storage time: 6months in the original packaging
before using for the first time. If stored for longer
than this, the overall service life will be reduced by
the corresponding amount of extra storage time.
Packaging
The packaging material is to be disposed of in ac-
cordance with local regulations.
Disposal
Components are to be disposed of separately in
accordance with local regulations.
Certification
Declaration of conformity
We, the manufacturer, hereby declare that the prod-
uct IC50 complies with the essential requirements
of the listed Directives and Standards.
Directives:
– 2014/35/EU
– 2014/30/EU
Standards:
– EN 60730:2011
The production is subject to the stated Quality System
pursuant to DINENISO9001.
Elster GmbH
Scan of the Declaration of conformity (D,GB)– see
www.docuthek.com
Eurasian Customs Union
The product IC50 meets the technical specifications
of the Eurasian Customs Union.