6.1.1.5 Edition 10.09
Technical Information · GB
• For directly ignited burners of unlimited capacity in
continuous operation pursuant to EN 746-2
• Continuous self-testing for faults
• Immediate fault lock-out or restart following flame failure
available as a switchable function
• Flame control with UV sensor or ionisation sensor
• Diverse installation possibilities via holes or snap
mechanism for DIN rail
• Space-saving installation on site with IFD 258..I with
integrated ignition
• Display for program status and flame signal intensity
Automatic burner control unit IFD 258
Technical Information · GB
To Next Page
