05
Kael RGB User Manual ∆ Custom lighting: create your own presets
You can individually personalize backlight illumination on five presets. You can turn off all lights
keeping illuminated the keys that you want and choose a different color for each key.
1. Choose the key where you want to insert your own preset (FN+6-0)
2. Press FN + to start the configuration (PRINT SCREEN button will start flicking)
3. Press FN + RIGHT ARROW button to change its color. This color define the color of the key you
want to activate for your preset.
4. Press the keys you want to be illuminated. You can combine different colors on the same preset
(use step 3 to change the color before activate a new keycap)
5. Press FN + to end the configuration.
∆ Custom lighting: create your own colors
You can create your own colors palette. The swatches thus created are static: they don’t flow with
any preset nor custom lighting effects.
1. Press FN + for five seconds.
2. Keys will start flicking.
continues in next page »
INDEX
Technical Specification
Shortcut keys on keyboard
Anti-ghosting keys
Extra shortcuts
Lighting mode key
LEDs display modes
∆ Common lighting settings
∆ Light modes
∆ Custom lighting: presets
∆ Custom lighting: create
your own presets
∆ Custom lighting: create
your own colors
∆ Custom lighting: keyboard
right side lighting
Macro settings
Reset default settings
Lighting presets
Shortcut keys on keyboard
∆ Custom lighting: presets
∆ Custom lighting: keyboard
right side lighting
∆ Common lighting settings
To Next Page
Loading...