Krone Comprima V 150 - Page 72

V - 24
Basic Settings and Operation
III
VPN00012_1
X
COM00211
2
X
Y
3
1
• Pos. III = soft inner bale core
Dimension X must be 105 mm after the setting is
made.
Setting of Springs for Front Floor Conveyor
Tension
• Make the spring setting by adjusting dimensions X and
Y on the right and left side of the machine to the
following values:
Comprima V150/V180 X = 130 mm
Comprima V150 Y = 60 mm
Comprima V180 Y = 90 mm
Should the rocker arms be on the same
height, the springs (1) on both rocker
arms must have the same tension