Need help?Do you have a question about the Krone Fortima V 1500 and is the answer not in the manual?
General| Type | Round Baler |
|---|---|
| Bale diameter | 1.00 - 1.50 m |
| Bale width | 1.20 m |
| Pick-up width | 2.05 m |
| Cutting Width | Not applicable |
| Number of Rotors | Not applicable |
| Required Tractor Power | 50 - 70 hp |
Describes the machine's function and the agricultural materials it compacts.
States the round baler is built exclusively for agricultural work.
Covers general safety guidelines, hazards, and personnel qualifications.
Provides instructions for safe machine stopping, securing, and support.
Details essential safety equipment and their function.
Outlines essential checks and preparations before the first operation.
Steps for connecting the machine to the tractor, including hitching.
Provides special safety instructions for hydraulic system connections.
Covers selecting between net tying and twine tying operations.
Instructions on how to operate and reset the bale counter.
Details how to interpret and set baling pressure indicators.
Describes how to manually and automatically start the tying process.
Procedure for testing sensors that detect bale firmness.
Explains the function and safety warnings for the ISOBUS Shortcut Button.
Steps for powering the KRONE ISOBUS Terminal on and off.
Details machine functions controllable via terminal keys and icons.
Explains how to operate the machine using a joystick.
Details specific menus for net tying, twine tying, pre-signalling, and start delays.
Information on error messages displayed and how to acknowledge or delete them.
Tasks to perform on the machine and tractor before road travel.
Safety instructions for switching off and securing the machine.
Details settings to perform or check before starting work on all machine types.
Guidance on achieving consistent bale density by evenly filling the bale chamber.
Steps for starting and completing the tying or wrapping process.
Details on default settings and adjusting the pick-up working height.
Guidance on setting baling pressure based on crop type and machine settings.
General aspects of the cutting system, including its components and operation.
Procedures for removing crop blockages from the feed rotor, cutting rotor, and pick-up.
Explains TIM functions, displays, and the TIM function key.
Lists net wrapping parts and their functions.
Covers settings for the twine brake, idler roller, sensors, and net brake.
Instructions on how to adjust the twine brake tension.
Guidance on adjusting the net brake tension and settings.
Details the central chain lubrication system and its components.
Instructions for adjusting the switching time of the floor conveyor stop.
Lists tightening torques for metric thread screws with control thread.
Details the location and specifications of various sensors on the machine.
Procedure for setting baling pressure indicators for Fortima F models.
Procedure for setting bale diameter sensors for Fortima V models.
Step-by-step guide for checking and changing gearbox oil.
Information on checking and adjusting the brake settings.
Safety warnings and steps for changing the blades.
Covers special safety instructions for lubrication and environmental disposal.
Covers safety precautions for hydraulic system work and hose line ageing.
Step-by-step instructions for replacing the hydraulic oil filter.
Guidance on preparing the machine for storage at the end of the season.
Steps for preserving the machine during off-season storage.
Checklist for preparing the machine for operation after storage.
Covers common malfunctions, their causes, and recommended remedies.
To Next Page