EasyManua.ls Logo

Krone Comprima V 150 User Manual

Krone Comprima V 150
430 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Original operating instructions
Comprima F 125
Comprima F 155
Comprima V 150
Comprima V 180
Comprima F 125 XC
Comprima F 155 XC
Comprima V 150 XC
Comprima V 180 XC
Comprima V 210 XC
(from serial no.: 976 393)
Order no.: 150 000 858 01 en
01.02.2018

Table of Contents

Other manuals for Krone Comprima V 150

Question and Answer IconNeed help?

Do you have a question about the Krone Comprima V 150 and is the answer not in the manual?

Krone Comprima V 150 Specifications

General IconGeneral
BrandKrone
ModelComprima V 150
CategoryLawn and Garden Equipment
LanguageEnglish

Summary

Safety

Basic safety instructions

General guidelines for safe operation, covering importance of instructions, personnel qualification, and hazard awareness.

Danger zones

Identifies hazardous areas around the machine and required safety distances for operation.

Traffic safety

Provides guidelines for safe road travel, including dimensions, lighting, and cornering.

Commissioning

Before initial start-up

Outlines essential checks and preparations before the first operation of the machine.

KRONE Operation Unit Alpha

Operating Machine Functions

Details how to operate key machine functions, including manual and automatic tying modes.

Start-up

Connect the machine to the tractor

Provides safety warnings and steps for correctly connecting the machine to the tractor.

Driving and Transport

Operation

Adjustments Before Starting Work

Lists all settings and checks required before commencing work.

Setting Baling Pressure

Details how to set the baling pressure for Comprima V models using handwheels.

Settings

Maintenance

Tightening torques

Lists critical tightening torques for metric thread screws based on stability class.

Maintenance – hydraulic system

Covers safety precautions and procedures for working with the hydraulic system.

Maintenance – lubrication

Details lubrication points, quantities, and intervals for machine components.

Malfunctions - Causes and Remedies

General malfunctions

Lists common malfunctions with their possible causes and recommended remedies.

Terminal menus

Menu 10 "Manual operation"

Details manual operation modes for net, twine, and film tying functions.

Menu 15 "Settings"

Covers various machine settings, including sensor tests and actuator diagnostics.

Terminal error messages

Faults of the electrics/electronics

Lists common electrical and electronic faults with possible causes and remedies.

Related product manuals