EasyManuals Logo

Krone EasyCut 3600 CV Original Operating Instructions

Krone EasyCut 3600 CV
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #90 background imageLoading...
Page #90 background image
Placing in Storage
90
Pos: 33.1 /Überschri ften/Überschri ften 1/A-E/Einlagerung @ 0\ mod_1197385459120_78. docx @ 19966 @ 1 @ 1
12 Placing in Storage
Pos: 33.2 /BA/Einlager ung/EasyCut / AM Mähwerk e/Einlagerung allge mein mit Bereifung @ 10\mo d_1222325595145_78.doc x @ 140026 @ @ 1
Park the machine in a dry location, but not in the vicinity of artificial fertilisers or livestock
buildings.
Before placing the machine in winter storage, clean inside and outside thoroughly. Dirt
adducts humidity and causes corrosion. If you use a high-pressure cleaner to do this, do not
keep a stream of water directed at bearing points.
After cleaning is completed, lubricate all lubrication points. Do not wipe off any grease that
comes out of bearing points. The hardened grease will provide additional protection against
moisture.
Lubricate the machine thoroughly.
Disassemble the PTO shaft. Grease the protective tubes of the PTO shaft to prevent
freezing. Grease the lubrication points on the cross joint and on the bearing rings of the
guard tubes.
Oil all joint points!
Touch up damaged paint and preserve all uncoated areas thoroughly with rust protection
agent.
Check all movable components such as deflector rollers, joints, tension rollers, etc. to make
certain they move easily. If necessary remove, clean, grease and remount. If necessary,
replace with new parts.
Use only original KRONE replacement parts.
CAUTION!
The machine should only be placed on blocks with a suitable vehicle lifting device. Make
certain that the machine is stable and safe when it is on blocks.
To remove load from the tyres, set the machine on blocks. Protect the tyres against external
influences such as oil, grease and direct sunlight, etc.
Perform the necessary repair tasks during the time immediately after the harvest season.
Draw up a list of all replacement parts you will need. This will make it easier for your
KRONE dealer to process your orders and you will be certain that your machine will be
ready for use at the beginning of the next season.
Pos: 33.3 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.doc x @ 4165 @ @ 1

Table of Contents

Other manuals for Krone EasyCut 3600 CV

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Krone EasyCut 3600 CV and is the answer not in the manual?

Krone EasyCut 3600 CV Specifications

General IconGeneral
BrandKrone
ModelEasyCut 3600 CV
CategoryFarm Equipment
LanguageEnglish

Related product manuals