20
Torque moments M (unless otherwise stated)
5. Care and maintenance
5.1. Special safety notes
A = thread size
(solidity class given on the head of the screw)
• Before correcting any operational faults or carrying out any repair, maintenace or cleaning
work, always disengage the driving system, stop the engine and remove the key from the
ignition!
• Avoid oil and grease coming into contact with the skin.
• Contact a doctor immediately for injuries caused by escaping oil.
• Follow all other safety notes to avoid injuries and accidents.
Periodically check all bolts and nuts and retighten if necessary!
5.2 General
Certain maintenance and service interavals should be observed to guarantee correct
operation of the rotary swather and to reduce wear and tear. These include, amongst other
things, cleaning, greasing, lubricating and oiling parts and components.
8
.
8
1
0
.
9
A
KR-1-130
A
Ø
5.6 6.8 8.8 10.9 12.9
M
A
(Nm)
M 4 2,2 3,0 4,4 5,1
M 5 4,5 5,9 8,7 10
M 6 7,6 10 15 18
M 8 18 25 36 43
M 10 29 37 49 72 84
M12 42 64 85 125 145
M14 100 135 200 235
M14x1,5 145 215 255
M 16 160 210 310 365
M16x1,5 225 330 390
M 20 425 610 710
M 24 730 1050 1220
M 24x1,5 350
M 24x2 800 1150 1350
M 27 1100 1550 1800
M 27x1,5 850
M 27x2 1150 1650 1950
M30 1450 2100 2450
KS-312-0
1
To Next Page
Loading...
