Kronoterm KT-2 User Manual

Id.: 17-16-13-2960-03 | 7.2017 6
► Disconnect the device power supply.
► Reconnect the device power supply.
► Accessing the menu SETUP OF
CONTROL LOOP.
The menu “Setup of control loop” can be accessed only during the first minute of reconnecting the
control panel by holding the and keys for 8 seconds.
11 MAIN SCREEN
12 OPERATING STATUS
13
SETTING TARGET ROOM
TEMPERATURE
Operation of
control loop.
Operational
setting for
control loop.
The room temperature currently set is displayed
when the or arrow is pressed. The
temperature is highlighted with an orange border.
Fast heating of
tap water /
Fail-safe anti-
freeze mode
is active.
Device
maintenance of
required.
Desired room temperature can be set by pressing
the arrow again, the setting is confirmed by
pressing the icon, or is automatically confirmed
after 8 seconds.
Child safety lock
is active.
Multiple alarms /
errors active.
Circulation pump
of the control
loop is currently
active.
8
sek
1 4
2 5
3 6
7
Menu /
confirm
External
temperature
Menu down /
decrease value
Time
Back /
cancel
Room
temperature
Menu up /
increase value
Operating
status
8
sec
Room temperature
movement trend

Kronoterm KT-2 Specifications

General

Brand	Kronoterm
Model	KT-2
Category	Control Unit
Language	English