Krüger & Matz KM0550 User Manual (English)

Questions and Answers:

T
Thomas GrayJul 25, 2025
Why does the Krüger & Matz KM0550 Tuner remote control not work?
- C
  Catherine BradleyJul 25, 2025
  The remote control might not work due to several reasons: * The device might be turned off, so turn it on. * The remote control may not be pointed correctly; ensure it's pointed at the device within 8 meters and within a 30° angle horizontally and vertically. * Obstacles might be blocking the signal; remove any obstacles between the remote and the device. * The batteries might be discharged; replace them with new ones.
N
Nancy WatsonJul 29, 2025
What to do if the Krüger & Matz KM0550 Tuner shows information that the channel is coded or unavailable?
- B
  Brandon EdwardsJul 29, 2025
  If your Krüger & Matz Tuner displays a message indicating that a channel is coded or unavailable, it means the channel you're trying to access is either encrypted or not currently broadcasting. The solution is to simply choose another channel.
B
bdavilaAug 3, 2025
What to do if there is no image or sound on my Krüger & Matz KM0550?
- E
  ethan17Aug 3, 2025
  If you're experiencing a lack of image or sound with your Krüger & Matz Tuner, the most likely cause is that the TV is not set to the correct mode. To resolve this, select the proper mode on your TV.
N
Nicholas LucasAug 6, 2025
What to do if the Krüger & Matz Tuner has no signal?
- B
  berrygloriaAug 6, 2025
  If your Krüger & Matz Tuner is showing 'no signal', check the antenna connection. The antenna may be disconnected, damaged, improperly set, or no signal is being transmitted.
M
mary42Aug 12, 2025
How to deal with forgotten channel password on Krüger & Matz KM0550?
- S
  Scott SantiagoAug 12, 2025
  To address a forgotten channel password on your Krüger & Matz Tuner, delete the locked channel and then scan for channels again.
R
Robert BassAug 15, 2025
Why is there no signal on my Krüger & Matz KM0550 Tuner when moved to another room?
- T
  Timothy AllenAug 15, 2025
  If you're experiencing signal issues with your Krüger & Matz Tuner after moving it to a different room, it's likely due to variations in antenna connection quality. The signal strength may be weaker in the new location, leading to poor channel reception or a complete loss of signal. To fix this, check the antenna connection or connect an amplifier to the antenna.
K
Keith MartinAug 20, 2025
How to fix Krüger & Matz KM0550 if the LED indicator is not on?
- N
  Natasha MoralesAug 20, 2025
  If the LED indicator on your Krüger & Matz Tuner isn't lit, it's likely that the power adapter is disconnected. Check the connection of the power adapter.

Krüger & Matz KM0550 Specifications

General

USB Port	Yes
HDMI Output	Yes
Scart Output	Yes
EPG	Yes
Teletext	Yes
Connectors	HDMI
Video Formats	MPEG-2, MPEG-4, H.264
Audio Formats	MP3, AAC
Resolution	1920 x 1080 px