Krups B90 - Warm Beer Dispensing Solutions; Lid Closure Troubleshooting

ENGLISH
14
The BeerTender
appliance is
dispensing warm
beer.
The BeerTender
DraughtKeg has
not been chilled
long enough and
is not at the right
serving
temperature.
Allow the
BeerTender
DraughtKeg to
cool in the
refrigerator for
about 12 hours or
inside the
BeerTender for up
to 18 hours until
ideal serving
temperature is
reached.
The lid of the
BeerTender does
not close.
The tap cover has
not been properly
closed.
Close the tap
cover properly.
The BeerTender
DraughtKeg has
not been correctly
installed.
Install the tap
correctly.
Ensure the
draught tube has
been installed
completely and is
not preventing the
lid from closing.
Problem Possible causes Solutions
1-BeertenderonewayB90US.qxd:1-B95onewayAmsterdam_UK.qxd29/01/089:22Page14