Why is my Krups b95 Beertender Kitchen Appliances BeerTender dispensing warm beer?
The BeerTender DraughtKeg may not have been chilled long enough to reach the correct serving temperature. Allow the DraughtKeg to cool in the refrigerator for about 12 hours, or inside the BeerTender for up to 18 hours, until the ideal serving temperature is achieved.
What to do if my Krups b95 Beertender BeerTender produces too much foam?
Too much foam can occur if the DraughtKeg hasn't cooled to the proper dispensing temperature. Allow the DraughtKeg to cool to the correct temperature. Also, ensure you firmly and quickly pull the tap handle down and forward as far as it will go. If the DraughtKeg has been shaken, wait 4 hours before dispensing.
What to do if no beer is being dispensed from my Krups b95 Beertender BeerTender?
First, ensure the appliance is switched on. If it is, the DraughtKeg might be empty, and you'll need to replace it. Also, check that a DraughtKeg is installed inside the appliance. Finally, make sure the tap handle is correctly installed and positioned.
How to fix Krups b95 Beertender BeerTender lid that does not close?
Ensure the tap cover is properly closed. Also, check that the DraughtKeg has been correctly installed, making sure the draught tube is fully inserted and not preventing the lid from closing.
Why is the volume level indicator blinking on my Krups b95 Beertender?
The scale needs to be reset with each new DraughtKeg. Turn the power on before inserting the DraughtKeg. If the DraughtKeg is already inside, open the BeerTender cover and lift the DraughtKeg for 3-5 seconds before placing it back in the machine.
Why is my Krups b95 Beertender Kitchen Appliances temperature indicator not reaching ready-to-drink level?
The BeerTender appliance may be exposed to a hot temperature or direct sunlight. Use the appliance indoors and move it to a room where the ambient temperature does not exceed 86°F.
What to do if ice forms in my Krups b95 Beertender Kitchen Appliances cooling chamber?
Ice formation can occur if the BeerTender is in a humid environment. Try moving it to a drier location. Alternatively, a fault may have occurred in the cooling system.
Why is beer flowing too slowly from my Krups b95 Beertender Kitchen Appliances BeerTender?
The tap handle may not be fully open (positioned at 45°). Open the tap completely to allow proper flow.
Why is my Krups Kitchen Appliances control display showing an increasing temperature?
A warm DraughtKeg may have been installed in a cold appliance. Allow the BeerTender system to compensate for the temperature change. The displayed temperature should start decreasing after a maximum of one hour.
Comprehensive safety guidelines for operating the appliance and preventing hazards.
Specific cautions on appliance use and essential guidance for safe use of power cords.
Details on the BeerTender's design for dispensing chilled beer and its specific compatibility.
Explanation of warning triangle and information symbols for user understanding.
Identification and listing of all parts of the main BeerTender draughting system.
Identification of the 5 Liter DraughtKeg and its associated beer tube.
Measures for child safety, fire prevention advice, and extinguisher recommendations.
Instructions for proper appliance setup, including placement, ventilation, and ambient temperature.
Basic handling advice and key factors for achieving optimal draught beer quality.
Guidance on chilling the DraughtKeg and preparing the BeerTender before inserting the keg.
Steps for setting up the BeerTender, cleaning the pour spout, and positioning components.
Explanation of control panel functions, temperature adjustment, and volume indicators.
Instructions for pouring a perfect draught beer, including glass preparation and pouring technique.
Procedures for emptying and cleaning the drip tray, and general interior cleaning.
Guidance on proper storage procedures and detailed cleaning instructions for the appliance.
Solutions for when the appliance does not turn on or no beer is being dispensed.
Resolving issues with excessive foam, slow beer flow, or a blinking volume indicator.
Addressing operational noises, ice formation, and potential faults in the cooling system.
Troubleshooting dispensing warm beer, lid closure problems, and incorrect keg installation.
Solutions for when the temperature indicator is not reaching the desired level or is increasing.
Guidelines for disposing of the BeerTender according to local ordinances for small appliances.
Information on how to contact Krups Consumer Service for questions and support.
Details on the 1-year limited warranty, including coverage, limitations, and exclusions.
Information on consumer legal rights, implied warranties, and how to find authorized service centers.
General| Type | Beer Dispenser |
|---|---|
| Brand | Krups |
| Model | B95 Beertender |
| Capacity | 5 liters |
| Cooling System | Thermoelectric |
| Material | Plastic and Metal |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Color | Black |
| Keg Compatibility | Compatible with Heineken Draught Kegs |
| CO2 System | Integrated CO2 system (uses disposable CO2 cartridges) |
| Power | 70 Watts |
To Next Page
