Krups b95 Beertender User Manual

12
Problem Possible causes Solutions
The BeerTender
produces too
much foam when
dispensing beer.
The BeerTender
DraughtKeg has
not reached the
right dispensing
temperature.
Allow the
BeerTender
DraughtKeg to
cool to the right
temperature.
The tap handle is
being moved too
slowly.
Firmly and quickly
pull the handle
down and forward
as far as it will go.
The DraughtKeg
has been shaken.
Wait 4 hours
before dispensing
beer.
The Volume Level
indicator is
blinking.
The Scale needs
to be reset with
each new
DraughtKeg.
Turn the power on
before inserting
DraughtKeg. If
DraughtKeg is
inside, open the
BeerTender Cover
and lift up the
DraughtKeg for 3-
5 seconds before
replacing into
machine.
1-Beertender one way B95 US.qxd:1-B95 oneway Amsterdam_UK.qxd 16/01/08 11:34 Page 12
H
SILGNE

Krups b95 Beertender Specifications

General

Brand	Krups
Model	b95 Beertender
Category	Kitchen Appliances
Language	English