Krups BeerTender VB2158

Other manuals for Krups BeerTender VB2158

User Manual21 pages

Questions and Answers

K
Kelly MaciasAug 20, 2025
Why does my Krups Beverage Dispenser produce too much foam?
- S
  stephenforbesAug 20, 2025
  Excessive foam when dispensing beer from your Krups Beverage Dispenser can occur for a few reasons: * The DraughtKegTM hasn't reached the correct dispensing temperature. Allow it to cool, using the temperature indicator on the control panel. * The DraughtKegTM was shaken. If so, wait 4 hours before dispensing. * The tap handle is being moved too slowly. Firmly and quickly pull the handle down and forward as far as it will go.
B
Beth MartinezAug 22, 2025
How to fix a Krups Beverage Dispenser that is not dispensing beer?
- S
  sharonlambertAug 22, 2025
  If your Krups Beverage Dispenser isn't dispensing beer, consider these possible causes: * The DraughtKegTM might be empty. Replace it with a new one. * There might not be a DraughtKegTM inside. Install one. * The tap handle might not be correctly installed or positioned. Ensure it is installed/positioned correctly.
J
John VazquezAug 25, 2025
What to do if my Krups Beverage Dispenser does not come on?
- M
  Matthew ForbesAug 25, 2025
  If your Krups Beverage Dispenser isn't turning on, the most likely cause is that it's not connected to the outlet. Connect the appliance to the outlet.
T
Tracy SchwartzAug 27, 2025
Why I cannot close the lid of my Krups Beverage Dispenser?
- N
  Nicole GonzalezAug 27, 2025
  If you're unable to close the lid of your Krups Beverage Dispenser, it could be due to: the tap cover not being positioned correctly (reposition it), or the DraughtKegTM not being correctly installed. To fix this, install the tap correctly and ensure the draught tube has been installed completely and isn't preventing the lid from closing.
B
Blake HughesAug 28, 2025
Why does beer flow out too slowly from my Krups Beverage Dispenser?
- M
  Michael RichardAug 28, 2025
  If beer is flowing too slowly from your Krups Beverage Dispenser, it might be because the tap handle is not open all the way. Open the tap completely.
J
Joseph WalkerAug 30, 2025
What to do if I cannot position the tap cover correctly on my Krups Beverage Dispenser?
- R
  Rodney WrightAug 30, 2025
  If you cannot position the tap cover correctly on your Krups Beverage Dispenser, it may be because you opened the draught beer tube by hand. Ensure the draught beer tube is closed before installing it onto the BeerTender® tapping mechanism.
P
Patrick HernandezSep 1, 2025
Why is my Krups BeerTender VB2158 Kitchen Appliances BeerTender® appliance producing too much foam?
- C
  cookebryanSep 1, 2025
  Too much foam can occur for several reasons: * The DraughtKegTM may not be cold enough. Allow it to cool to the correct temperature, using the temperature indicator on the control panel as a guide. * The DraughtKegTM may have been shaken. If so, wait 4 hours before dispensing. * The tap handle may be moved too slowly. Pull the handle down and forward firmly and quickly, as far as it will go.
A
Anthony MoralesSep 3, 2025
What to do if my Krups BeerTender VB2158 BeerTender® appliance does not come on?
- C
  cdyerSep 3, 2025
  If the appliance doesn't turn on, make sure it is properly connected to the power outlet. This is the most common reason for the appliance failing to start.
B
buckluisSep 5, 2025
What to do if no beer is being dispensed from my Krups BeerTender VB2158 Kitchen Appliances BeerTender®?
- L
  Leonard WatkinsSep 5, 2025
  If no beer is dispensing, consider these possibilities: * The DraughtKegTM may be empty. If so, replace it with a new one. * There might not be a DraughtKegTM installed. Install a DraughtKegTM inside the appliance. * The tap handle might not be correctly installed or positioned. Ensure the tap cover is correctly installed and positioned.
J
jessicasmithSep 7, 2025
Why is my Krups Kitchen Appliances BeerTender® appliance dispensing warm beer?
- W
  wunderwoodSep 7, 2025
  The beer may be warm because the DraughtKegTM hasn't been chilled long enough to reach the proper serving temperature. Allow it to cool longer inside the appliance.