What to do if I cannot close the lid of my Krups BeerTender VB2158 BeerTender®?
If you're having trouble closing the lid, it might be due to these reasons: * The tap cover may not be positioned correctly. Ensure it is properly aligned. * The DraughtKegTM may not be correctly installed. Make sure the tap is correctly installed and that the draught tube is fully inserted and not blocking the lid.
How to fix if beer flows out too slowly from my Krups Kitchen Appliances BeerTender®?
If the beer is flowing too slowly, the tap handle might not be fully open. Make sure to open the tap completely to allow proper flow.
Why I cannot position the tap cover correctly on my Krups BeerTender VB2158 BeerTender®?
If you're having trouble positioning the tap cover correctly, it could be due to: * The draught beer tube (white plastic part at the end of the serving tube) may have been opened by hand. Ensure the draught beer tube is closed before installing it onto the tapping mechanism. * The DraughtKegTM tap or tube may not be inserted correctly. Ensure the draught beer tube is properly installed in the tapping mechanism.
What to do if ice forms in the cooling chamber of my Krups BeerTender VB2158 BeerTender®?
If ice is forming in the cooling chamber, it could be due to: * The BeerTender® being installed in a humid environment. Move it to a drier location. * A fault in the cooling system. Have the BeerTender® repaired by an authorized service center.
Why the temperature indicator on the control panel does not light up on my Krups Kitchen Appliances BeerTender®?
The temperature indicator might not light up if the appliance is exposed to high temperatures or direct sunlight. Use the appliance indoors and move it to a room where the temperature does not exceed 86°F.
Factors for achieving optimal draught beer quality: beer temperature and hygiene.
Ensuring the beer keg reaches the correct temperature for optimal pouring.
Step-by-step guide for attaching the beer tube and inserting the keg.
Proper tilting and handle operation for optimal beer pouring and foam head.
Procedure for cleaning the interior of the BeerTender after use.
Checks and remedies for when the appliance fails to power on.
Ensuring correct installation of the beer keg and tube.
Troubleshooting steps for when no beer is dispensed from the appliance.
Addressing issues causing too much foam during beer dispensing.
Identifying causes and solutions for dispensing warm beer.
General| Brand | Krups |
|---|---|
| Model | BeerTender VB2158 |
| Category | Kitchen Appliances |
| Language | English |
To Next Page
