Use and maintenance / SERIE EA 82xx
KRUPS Espresseria Automatic Premium
15
DEUTSCH
ENGLISH
FRANCAIS
NEDERLANDS
DANSK
SVENSKA
NORSK
SUOMI
ITALIANO
3.4 Rinsing the coffee circuit
After several days without being used,
you need to rinse the coffee circuit.
Once the appliance has been switched
on, you can rinse at any time via the
menu "Servicing" using the PROG key
and by selecting "Rinsing".
Press the ON/OFF button (1).
A welcome message is displayed on the
screen, then another warning that the ap-
pliance is preheating. A few seconds later,
a question will appear on the screen as-
king if the appliance needs to be rinsed or
not.
Place a sufficiently large recipient under
the coffee tubes, then select "Yes" with
the knob and confirm by pressing OK.
The rinsing procedure starts and stops au-
tomatically, after around 40 ml have pas-
sed through.
The drink selection menu is then displayed on the screen.
To Next Page
Loading...
