Use and maintenance / SERIE EA 82xx
KRUPS Espresseria Automatic Premium
18
Sub-menu Function
Coffee temperature
You can adjust the temperature of your coffee or espresso to 3 levels, where
level 3 is the hottest temperature.
Exit
End of the preview of the sub-menus.
Menu "Machine info"
Sub-menu Function
Coffee cycles
Displays the total number of coffee cycles carried out by the machine.
Water cycles
Displays the total number of hot water cycles carried out by the machine.
Steam cycles
Displays the total number of steam cycles carried out by the machine.
Rinsing
Displays the total number of rinsing operations carried out by the machine.
Cleaning
Access to the following sub-menus.
- Last
Number of coffees prepared since the last cleaning.
- Next
Number of coffees that can be made before next cleaning.
- Clean
Starts the cleaning programme.
- Exit
End of Cleaning menu.
Descaling
Access to the following sub-menus.
- Last
Number of hot water or steam cycles made since the last descaling.
- Next
Number of hot water or steam cycles that can be made before next descaling.
- Exit
End of the Descaling menu.
Water filter
Access to the following sub-menus.
Note : The "Last" and "Next" options are only accessible if you have fitted a filter before-
hand, accessible via Product info/Filter/Install.
!
- Last
Displays the date when the filter was last changed and the quantity of water filte-
red since then.
- Next
Displays the date when the filter needs to be changed and the quantity of water
that may be filtered until then.
- Install
Starts the filter replacement procedure.
- Exit
End of the Filter menu.
Exit
End of the preview of the sub-menus.