Once the second
rinsing is finished,
the ‘calc’ light will
go off.
15
Again press the ‘Service’
key. The ‘calc’ light
will become solid.
A second automatic cycle
will last about 6 minutes.
Empty the drip tray
and then re-insert.
Empty and then refill
your water tank.
Be sure to complete the entire descaling cycle to avoid any risk of intoxication.
The descaling cycle is a discontinuous cycle. Do not put your hands under the coffee outlets during the cycle.
These parts
are not
designed
to go into the
dishwasher
3 – Second rinsing
At the end of the first rinsing, the ‘calc’ light will flash. A second automatic cycle is required and will last 6 minutes.
Your machine is now ready for use again.
Remove your waste
water container and
the drip tray, then fit
them again.
MOVING THE MACHINE
ELECTRICAL OR ELECTRONIC PRODUCT AT END OF SERVICE LIFE
Always remove the power supply
cord from the socket and let your
machine cool down before clea-
ning it.
Do not use utensils or cleaning
products likely to scratch or cor-
rode the machine.
Wipe the body of the machine on
the outside using a moist cloth.
Clean the cleaning
tray, the coffee
grounds collector
and the drip tray
and its grid with
warm water and
a mild liquid
detergent.
Rinse the water tank with
fresh water.
Keep the original packaging and reuse it when moving.
GENERAL MAINTENANCE
L Your appliance contains valuable materials which can be recovered
or recycled.
 Leave it at a local civic waste collection point.
If there is not enough water in the water tank, you will be warned by the light. Add the appropriate amount of water
to the tank and the descaling program will continue automatically.
If the coffee grounds collector is not inserted properly you will be warned by the light flashing. Insert the collector
again for the cycle to continue automatically. If a power failure occurs during the cycle, you will have to start it again
right from the beginning. You will not be able to postpone this operation.
If the unpacked machine is dropped, it is advised to take it to an authorized Krups service center to avoid any
risk of fire or electrical problems.
±±
6 mn
Take the
water
tank off,
fill it up
and put it
back in
place.
Underneath
the coffee out-
lets and the
steam nozzle,
place a reci-
pient that can
contain
at least
0.15 l/5 oz.
Start a long
rinse
program by
pressing the
“service” but-
ton. The
“clean” and
“calc” lights
come on.
When a long rinsing program is necessary, the appliance warns you of this by flashing the “clean” and
“scale” lights.
+
When the long
rinsing program
is over, the
“clean” and
“scale” lights
turn off again.
LONG RINSING PROGRAM
Environment protection first !
To Next Page
Loading...
Need help?
General
