Krups KP 5000 - Assembling Spacers; Assembling Housing Left and Right

R E P A I R
Generalassemblyinformation
• Reassemblemachin einreverseorderof generaldis assembly.
Assemblingspacers
• Leftandrightspacersareinterchangeablebuthaveaspecialfittingposition.
Assemblinghousingleft/right
• Beforeassembling,checkhousing leftandrightforscratches,defectsnapconnec
tionsorlatches.Replaceifnecessary.
• Inserthousingsatthebottomofcenterpartatfirst.
• Payattentiontocorrectfittingpositionof PCBassemblyinhousingleft.
Checkfunctionofpowerbuttonafterassembly(audibleclick).
• Makesurethatallsnapconnectionsandlatchesofhousingleftandrightareclosed
andlocked.Payspecialattentiontothesnapconnection(K)betweenthetwo
housingpartsatthetop.