Krups KP 5006 - Preparation for First Use

O P E R A T I N G
Preparation,firstuse
Th enewmachinehastoberinsedproperlybeforefirstuseaccordingtothefollowing
sequence:
A timer or stop
watch is helpful to
observe the rinsing
times.
The machine will
not work without a
capsule holder inserted.
Do not insert a
capsule yet.
The pre-heating
time is approx.
30 sec.
1. Rinsewatertankatfirst .Thenfill
watertankwithfresh,potablewater.
2. Checkthatcapsuleholde risempty
(nocapsule)forthefollow ingrinsing
precedure.
3. Insertcapsuleholderandclose
lockinghandle.
4. Placeajugwithenoughcapactiy
underoutlet.
5. Makesurethatselection leverisin
centralposition.
6. Connectmainsplug.
7. Switchmach ineON.
8. Waittillpowerbuttonlightsupgreen.
9. Setselectionleveratposition
(
(coldwater).Let waterrunthrough
for approx.60sec.