R E P A I R
6. Examineuppersideofinjectorplate.
7. Cleaninteriorspaceofsealingringwithatoothpicketc.
8. Clearblockedboreofinjectorwithcleaningneedle.
If upper side of
injector plate is wet
and badly soiled, the
sealing ring is defect. In
that case replace com-
plete extraction head.
Alternatively use a
pin or needle with
dia. 0.6 mm max. to clear
the injector bore. A piece
of polyamid fishing line
or nylon monofilament
with suitable diameter
can be used also..
To Next Page
Loading...
