KRUUSE PS250 - Appendix 1

PS250 User Instructions
4. Appendix：
appendix 1
TRN=1
TRN=2
TRN=3
Hod=1
[PRINT/HOLD]button would be
ineffective
Only with
continuous transmission
Press[PRINT/HOLD] button，
print one time.
Hod=2
1.After 1 second of the weighing
stability,the scale would go
through the Hold status
automatic.
2.Release condition：
a.The time is up according to
the setting in Hit function.
b.Press[PRINT/HOLD] button
1.with continuous transmission
2. After 1 second of the weighing
stability,the scale would go
through the Hold status
automatic.
3.Release condition：
a.The time is up according to the
setting in Hit function.
b.Press[PRINT/HOLD] button
1.After 1 second of the
weighing stability,the scale
would go through the Hold
status,and print one time
automatic;
2.Press[PRINT/HOLD]
button，print one time again.
3..Release condition：
a.The time is up according to
the setting in Hit function.
b.Press[PRINT/HOLD]
button
Hod=3
1.Press the [PRINT/HOLD]
button,the scale would go
through the Hold status.
2.Release condition：
a.The time is up according to
the setting in Hit function.
b.Press[PRINT/HOLD] button
1.with continuous transmission
2. Press the [PRINT/HOLD]
button,the scale would go
through the Hold status.
3. Release condition：
a.The time is up according to the
setting in Hit function.
b.Press[PRINT/HOLD] button
1. Press the [PRINT/HOLD]
button,the scale would go
through the Hold status.The
scale would print one time;
2.Press the [PRINT/HOLD]
again,the scale would print
one time again;
3. Release condition：
a.The time is up according to
the setting in Hit function.
b.Press[PRINT/HOLD]
button 3rd time(No print)
Note：When the scale is in Hold Status one time,you should take down the object
on the scale,and Return to Zero,then the scale could be in Hold Status once
again.