PS250 User Instructions
Safety
Warnings
Safe installation
Take care when lifting and transporting heavy objects.
Do not overload the machine. Take care not to exceed the
weighing capacity of the machine.
Pluggable equipment must be installed near an easily
accessible socket outlet. Permanently connected equipment
must have a readily accessible disconnect device
incorporated in the fixed wiring.
For your protection all mains(110v or 230v),equipment used
out of doors or in wet or damp conditions should be supplied
from a correctly fused source and protected by an approved
RCD.
The mains lead must be connected to a supply outlet with a
protective earth contact. The electrical supply at the
socket outlet must provide overcurrent protection of an
appropriate rating.
IF IN DOUBT SEEK ADVICE FROM A QUALIFIED
ELECTRICIAN.
Safe use
To avoid the possibility of electric shock or damage to the
machine, always switch off the machine and isolate from the
power supply before carrying out any routine maintenance.
To Next Page
Loading...