21
EN
LOGIN BY USER PIN / SCENARIOS
After the user digit user PIN, that is always 6 digit long, the keypad
will show the enabled functions (starting from the most used one,
depending on the enabled choices
2
) and access is granted to the fi rst
level of the menu.
Let’s assume, for example, that two functions are enabled on the
keyboard, assigned to key 0 (system off) and to key 1 (system on)
respectively; the keyboard shows the function to be applied, or the
most frequently used one; if you don’t press any key within 3 seconds,
the function shown on the display is performed automatically and the
keyboard returns to the stand-by mode
3
.
SHORTCUTS
Press a numeric key to activate the corresponding function, or press the
# key to go into the main menu.
SEQUENTIAL EXECUTION OF MULTIPLE SCENARIOS
To execute multiple scenarios in sequential mode, simply press the enter
key after the fi rst scenario without having to re-enter user code.
3
If the proposed function is not to be applied, use the circular scroll to move to the desired
action and confi rm it using the Enter key
2
On basis step on Bus Peripherals / ergo x / Macro Functions
In the user menu you can browse through the following items using the
circular scroll.
To Next Page
Loading...
Need help?
General
