KTM 1190 Adventure EU User Manual (English)

Questions and Answers:

E
ejonesJul 30, 2025
What to do if my KTM 1190 Adventure EU engine does not crank?
- J
  jacqueline00Jul 31, 2025
  If your KTM Motorcycle engine won't crank when you press the electric starter, first ensure the emergency OFF switch is in the ON position. If it’s already on, follow the start procedure. A discharged battery can also prevent cranking, so recharge the battery. Other potential causes include a faulty safety start system, an inactive ICU, or issues with the CAN bus communication or EFI/MCU control units. In such cases it will be necessary to read out the fault memory using the KTM diagnostics tool.
E
Erica FranklinAug 5, 2025
What to do if KTM 1190 Adventure EU engine turns but does not start?
- W
  Wendy RobinsonAug 5, 2025
  If your KTM Motorcycle engine turns over but doesn't start, check if the coupling of the fuel hose connection is disconnected and reconnect it. The fuel quality might also be insufficient, so add suitable fuel. Also, a defect in the fuel injection system may be the cause and you may need to read out the fault memory using the KTM diagnostics tool.
L
Laura WashingtonAug 10, 2025
Why does the combination instrument on my KTM Motorcycle show nothing?
- M
  Mark NewmanAug 10, 2025
  If the combination instrument on your KTM Motorcycle display is blank, start by checking the fuses in the fuse box and replace any that are blown. Also, inspect the main fuse and replace it if necessary. A discharged battery could also be the cause, so recharge it. Finally, check the ignition/steering lock for any faults.
D
david81Aug 14, 2025
What to do if the ABS warning lamp lights up on my KTM 1190 Adventure EU?
- J
  Jesse CochranAug 14, 2025
  If the ABS warning lamp lights up on your KTM Motorcycle, the ABS fuse may be blown and you should change the fuses in the fuse box. It could also indicate a significant difference in wheel speeds between the front and rear wheels; in this case, stop, switch off the ignition, and start again. If the problem persists, there may be a malfunction in the ABS, and you may need to read out the fault memory using the KTM diagnostics tool.
C
Curtis MendezAug 19, 2025
What causes my KTM Motorcycle engine to die during a trip?
- A
  Anthony MarksAug 20, 2025
  If your KTM Motorcycle engine dies during a trip, first check if you're out of fuel and refuel if necessary. Another potential cause is a defect in the fuel injection system, which may require reading out the fault memory using the KTM diagnostics tool.
S
stephaniegutierrezAug 25, 2025
Why does my KTM 1190 Adventure EU engine only turn if the clutch lever is drawn?
- J
  James WalkerAug 25, 2025
  If your KTM Motorcycle engine only turns when the clutch lever is drawn, make sure the vehicle is not in gear and shift the transmission to idle. It could also indicate a faulty safety start system, which may require reading out the fault memory using the KTM diagnostics tool.

KTM 1190 Adventure EU Specifications

General

Displacement	1195 cc
Bore x Stroke	105 mm x 69 mm
Torque	125 Nm @ 7500 rpm
Compression Ratio	12.5:1
Fuel System	Electronic fuel injection
Ignition	Contactless, controlled, fully electronic ignition system with digital ignition timing adjustment
Starter	Electric starter
Transmission	6-speed
Rear Suspension	WP monoshock
Wheelbase	1560 mm
Fuel Capacity	23 liters
Dry Weight	217 kg
Power	150 hp
Clutch	Wet, multi-disc
Frame	Chromium-Molybdenum steel trellis frame, powder-coated
Front Suspension	WP 48 mm USD forks
Front Brake	Dual 320 mm discs
Rear Brake	Single 267 mm disc
ABS	Bosch 9ME combined ABS (switchable)
Seat Height	860 mm
Wheels	Cast aluminum
Front Tire	120/70 R 19
Rear Tire	170/60 R 17
Cooling	Liquid cooling

Summary

Means of Representation

Symbols Used

Explains the meaning of symbols used in the manual.

Formats Used

Explains typographical formats used in the document.

Safety Advice

Intended Use and General Safety Advice

Covers intended use, general safety advice, and risk symbols.

Risk Symbols and Tampering Warnings

Details degrees of risk symbols and warnings against tampering.

Safe Operation Guidelines

Provides guidance on safe vehicle operation and handling.

Protective Clothing, Work Rules, and Environment

Covers protective clothing, work rules, and environmental considerations.

Owner's Manual Importance

Emphasizes the importance of reading and keeping the owner's manual.

Important Information

Warranty, Service, and Parts

Outlines warranty, operating substances, spare parts, and service requirements.

Figures and Customer Service

Explains figure usage and provides customer service information.

View of Vehicle

Front Left Side View Identification

Identifies components shown in the front left side view of the vehicle.

Rear Right Side View Identification

Identifies components shown in the rear right side view of the vehicle.

Serial Numbers

Chassis and Type Label Identification

Details the location of chassis and type label numbers.

Key and Engine Number Identification

Explains how to find the key and engine numbers.

Fork and Shock Absorber Part Numbers

Indicates where to find fork and shock absorber part numbers.

Controls

Clutch and Hand Brake Levers

Describes the clutch lever and hand brake lever operations.

Throttle Grip and Left Handlebar Switches

Covers throttle grip and the left handlebar switch assembly.

Light and Hazard Flasher Switches

Explains the operation of the light and hazard warning flasher switches.

Menu and Turn Signal Switches

Details the menu and turn signal switch functions.

Horn Button and Right Handlebar Switches

Covers the horn button and right handlebar switch assembly.

Ignition Lock and Starter Button

Explains the ignition/steering lock and electric starter button.

Immobilizer and Accessory Socket

Covers the immobilizer system and the electrical accessory socket.

Opening the Filler Cap

Step-by-step guide to opening the fuel filler cap.

Closing the Filler Cap

Step-by-step guide to closing the fuel filler cap.

Fuel Cocks Operation

Explains the function and operation of the fuel cocks.

Storage Compartment Access

Details how to open and close the storage compartment.

Seat Lock Mechanism

Describes the location and function of the seat lock.

Tool Set and Grab Handles

Locates the tool set and describes grab handles.

Luggage Rack and Passenger Footrests

Covers luggage rack plate and passenger footrest adjustment.

Shift Lever Operation

Explains the shift lever and gear position indication.

Vehicle Support Stands

Details the operation of the side stand and center stand.

Combination Instrument

Instrument Overview and Basic Functions

Introduces the instrument cluster, its displays, and activation.

Matrix and Segment Display Details

Explains the matrix and segment displays and their information.

Indicator Lamps and Their Meanings

Lists and explains the various indicator lamps on the instrument panel.

Matrix Display Messages

Describes messages that appear on the matrix display for warnings and information.

Shift Warning Light Functionality

Explains the operation of the shift warning light based on engine speed.

Service Display and Menu Navigation

Covers the service display and the main menu structure.

Trip Meter Functions (Trip 1 & 2)

Details the functionality of the trip meters for tracking distance and fuel.

General Information and TPMS

Explains how to access general vehicle info and TPMS data.

Favorites and Settings Menus

Guides on setting favorite menus and adjusting vehicle settings.

Warnings and Optional Heat Grips

Covers the warnings menu and heat grip adjustment.

MTC/ABS and Load Settings

Explains traction control, ABS modes, and load settings.

Damping and Drive Mode Selection

Details suspension damping adjustments and drive mode selections.

Comprehensive Menu Overview

Provides a visual overview of the combination instrument's menu structure.

Language and Distance Unit Settings

Explains how to set language and distance units.

Temperature and Volume Unit Settings

Covers setting temperature and volume units.

Pressure and Clock/Date Settings

Details pressure unit settings and clock/date configuration.

Fuel Consumption and DRL Settings

Explains fuel consumption display and DRL settings.

Shift Light and Quick Shift Settings

Covers shift light configuration and quick shift availability.

Heat Grips Menu Operation

Explains how to operate the heat grips menu.

Ergonomics

Adjusting the Driver's Seat

Provides instructions for adjusting the driver's seat position.

Handlebar Position Adjustment

Details how to adjust the handlebar position for comfort.

Wind Shield Adjustment Procedure

Step-by-step guide for adjusting the wind shield.

Clutch and Brake Lever Adjustment

Explains how to adjust the basic settings of the clutch and brake levers.

Rider Footrest Adjustment

Covers mounting options and adjusting rider footrests.

Foot Brake Lever Adjustment

Details adjusting the basic position of the foot brake lever.

Shift Lever Position Adjustment

Explains checking and adjusting the basic position of the shift lever.

Preparing for Use

Advice for First Use

Provides crucial advice for the first use of the motorcycle.

Engine Running-in Procedure

Outlines the recommended procedure for running in the engine.

Vehicle Loading Guidelines

Covers guidelines for loading the vehicle and maximum speed with luggage.

Riding Instructions

Pre-Ride Checks and Starting Procedures

Details pre-ride checks, starting the engine, and starting off.

Shifting Gears and Riding Techniques

Explains shifting gears, riding, and general riding advice.

Applying Brakes Safely

Provides instructions and warnings on applying the brakes correctly.

Stopping, Parking, and Transport

Details procedures for stopping, parking, and transporting the motorcycle.

Transport Precautions

Covers precautions related to transporting the motorcycle.

Stopping and Parking Procedures

Details safe stopping and parking procedures, including steering lock.

Service Schedule

Required Maintenance Tasks and Intervals

Lists required maintenance tasks and their service intervals.

Recommended Maintenance Tasks

Lists recommended maintenance tasks beyond the required schedule.

Suspension Setting

Damping and Load Adjustments

Explains how to adjust suspension damping and load settings.

Fork and Shock Absorber Adjustments

Details adjusting fork compression and rebound damping.

Shock Absorber Rebound Damping

Explains adjusting the rebound damping of the shock absorber.

Shock Absorber Spring Preload

Details adjusting the spring preload of the shock absorber.

Service Work on the Chassis

Center Stand Operations

Covers raising and removing the vehicle using the center stand.

Seat Removal and Installation

Details removing and mounting the passenger and driver seats.

Chain Maintenance Procedures

Covers checking chain dirt, cleaning, and checking/adjusting chain tension.

Chain Cleaning Details

Provides detailed steps for cleaning the motorcycle chain.

Chain Tension Checking

Explains how to check the chain tension.

Chain Tension Adjustment

Details the procedure for adjusting the chain tension.

Chain, Sprocket Wear Check

Covers checking wear on the chain, rear sprocket, and engine sprocket.

Hydraulic Clutch Fluid Check

Explains how to check and correct the hydraulic clutch fluid level.

Steering Head Bearing Play Check

Details how to check and adjust steering head bearing play.

Triple Clamp Cover Procedures

Covers removing and installing the bottom triple clamp cover.

Front Side Cover Removal

Details the steps for removing the front side cover.

Front Side Cover Installation

Details the steps for installing the front side cover.

Mask Spoiler Removal

Explains how to remove the mask spoiler.

Mask Spoiler Installation

Explains how to install the mask spoiler.

Front Fender Removal

Details the steps for removing the front fender.

Front Fender Installation

Details the steps for installing the front fender.

Tank Cover Removal

Details the steps for removing the tank cover.

Tank Cover Installation

Details the steps for installing the tank cover.

Wind Shield Removal

Details the steps for removing the wind shield.

Wind Shield Installation

Details the steps for installing the wind shield.

Brake System

ABS System Operation and Checks

Explains the ABS system, its modes, and functional limitations.

Brake Disc and Fluid Level Checks

Covers checking brake discs, fluid levels, and adding fluid.

Brake Fluid Addition

Step-by-step guide for adding front and rear brake fluid.

Brake Lining Wear Checks

Explains how to check front and rear brake linings for wear and damage.

Wheels, Tires

Front Wheel Removal and Installation

Provides step-by-step instructions for removing and installing the front wheel.

Rear Wheel Removal and Installation

Provides step-by-step instructions for removing and installing the rear wheel.

Hub Dampers and Spoke Tension Checks

Covers checking rear hub dampers and spoke tension.

Tire Condition and Air Pressure Checks

Covers checking tire condition, age, and air pressure.

Electrical System

Daytime Running Light and Battery Removal

Explains daytime running light operation and battery removal.

Battery Installation and Recharging

Details battery installation, recharging procedures, and warnings.

Main Fuse and Fuse Box Servicing

Covers changing main fuses and fuses in the fuse box.

Headlight Mask Servicing

Details removing and refitting the headlight mask.

Headlight Bulb Replacement

Explains how to change the low beam and high beam bulbs.

Headlight Setting and Range Adjustment

Covers checking and adjusting the headlight setting and range.

Ignition Key Activation/Deactivation

Details activating and deactivating ignition keys and handling lost keys.

Cooling System

Coolant Level Checks and Adjustments

Guides on checking and correcting the coolant level in the compensating tank.

Engine Tuning

Drive Mode and Traction Control Settings

Explains how to select drive modes and manage traction control.

Service Work on the Engine

Engine Oil Level Checks and Changes

Covers checking engine oil level, changing oil/filter, and adding oil.

Cleaning, Care

Motorcycle Cleaning Procedures

Details how to clean the motorcycle, including precautions.

Winter Operation and Maintenance

Outlines checks and maintenance for winter operation.

Storage

Motorcycle Storage and Retrieval Procedures

Covers steps for storing the motorcycle and preparing it for use.

Troubleshooting

Common Faults, Causes, and Actions

Lists common problems, their causes, and recommended solutions.

Technical Data

Engine Specifications and Torque Values

Provides engine details and component tightening torques.

Fluid Capacities and Chassis Data

Lists fluid capacities and chassis specifications.

Electrical System and Tire Specifications

Details electrical system components, tires, fork, and shock absorber data.

Chassis Tightening Torques

Lists specific tightening torques for chassis components.

Substances

Recommended Fluids and Fuels

Specifies recommended brake fluid, coolant, engine oil, and fuel.

Auxiliary Substances

Recommended Maintenance Products

Lists recommended products for chain care, cleaning, and protection.

Standards

Technical Standards and Classifications

Explains standards like JASO T903 MA and SAE viscosity.

Related product manuals

KTM 2014 1190 Adventure

228 pages

KTM 1190 Adventure 2016

10 pages

KTM 1190 Adventure 2014

16 pages

KTM 1190 RC8 EU 2008

210 pages

KTM 1190 RC8 R EU/UK 2009

242 pages

KTM 2013 1190 RC8 R EU/UK

272 pages

KTM 990 ADVENTURE EU

218 pages

KTM 390 ADVENTURE EU 2022

133 pages

KTM 1190 RC8 R

283 pages

KTM 2008 1190 RC8 USA

247 pages

KTM 1190 Adventure EU User Manual

Table of Contents