Why does my KTM Motorcycle engine only turn if the clutch lever is drawn?
Your KTM Motorcycle engine might only turn when the clutch lever is drawn because: * The vehicle is in gear, so shift the transmission into neutral. * The vehicle is in gear and the side stand is folded out, so shift the transmission into neutral.
What does it mean if the malfunction indicator lamp lights up yellow on KTM 200 Duke US 2020?
If the malfunction indicator lamp lights up yellow on your KTM Motorcycle, it indicates a malfunction in the electronic fuel injection. Read out the fault memory using the KTM diagnostics tool.
General| Displacement | 199.5 cc |
|---|---|
| Bore x Stroke | 72 mm x 49 mm |
| Compression Ratio | 11.5:1 |
| Fuel System | Electronic Fuel Injection |
| Transmission | 6-speed |
| Starter | Electric |
| Frame | Steel trellis frame |
| ABS | Yes |
| Front Tire | 110/70-17 |
| Rear Tire | 150/60-17 |
| Engine Type | 1-cylinder, 4-stroke engine |
| Power | 19 kW (26 hp) at 10, 000 rpm |
| Torque | 19 Nm @ 8, 000 rpm |
| Front Suspension | USD forks, 43 mm |
| Rear Suspension | Monoshock |
| Front Brake | 300 mm disc |
| Rear Brake | 230 mm disc |
| Ground Clearance | 170 mm |
| Fuel Capacity | 13.4 liters |
Provides safety warnings for rider condition, exhaust gases, and component heat.
Details setting the clock, adjusting shift speed RPM, and ABS mode selection.
Covers rider fitness, protective clothing, tire tread patterns, and approved tires/wheels.
Warns about total weight, axle loads, luggage mounting, and visibility effects.
Lists essential pre-ride checks including fluids, tires, and controls.
Details starting procedures, including safety warnings and initial movement.
Provides guidance and warnings on shifting, load changes, and riding techniques.
Warns about brake system conditions, stopping distance, and ABS effects.
Details fire hazard warnings, procedure, fuel types, and additives.
Lists required maintenance tasks at different intervals (km/months).
Explains ABS components, modes, operation, and warnings.
Explains checking and adding front/rear brake fluid, with warnings.
Explains checking front/rear brake lining thickness and replacement.
Covers checking tires for damage, tread depth, and age.
Explains checking tire pressure for optimal performance and safety.
Details the process for changing ABS fuses, with safety warnings.
Provides procedures and warnings for checking coolant levels.
Explains how to check engine oil level at operating temperature.
Addresses faults related to engine not starting or turning over.
Troubleshoots ABS warning lamp and lighting system faults.
Provides detailed technical specifications for the engine.
To Next Page