What causes white smoke emission in KTM Motorcycle exhaust gas?
If your KTM Motorcycle emits white smoke (steam) in the exhaust gas, it could be due to a damaged cylinder head or cylinder head gasket. Check these components for damage.
Why are values in combination instrument deleted on KTM Motorcycle?
If the values in the combination instrument (time, stop watch, lap times) are deleted on your KTM Motorcycle, the combination instrument battery is likely empty.
Why gear oil exits at the vent hose on KTM Motorcycle?
If gear oil is exiting at the vent hose of your KTM Motorcycle, it's likely because too much gear oil was added. Check the gear oil level.
What to do if my KTM 250 EXC 2023 Motorcycle engine overheats?
If your KTM Motorcycle engine overheats, start by checking the coolant level for leaks and ensure it's at the correct level. Insufficient airflow can also cause overheating, so switch off the engine when stationary. Clean any dirt from the radiator fins to improve cooling efficiency. Foam formation in the cooling system may also be a cause; if so, drain and refill the coolant. Inspect the cylinder head, cylinder head gasket, and radiator hose for damage or bending. Finally, verify that the thermostat is functioning correctly, opening around 70 °C (158 °F).
Why is the malfunction indicator lamp lighting up on my KTM 250 EXC 2023?
If the malfunction indicator lamp lights up or flashes on your KTM Motorcycle, there may be a malfunction in the electronic fuel injection system. Check the wiring for damage, inspect the electrical plug-in connectors for corrosion, and use the KTM diagnostics tool to read out the fault memory.
General| Engine Type | 1-cylinder, 2-stroke engine |
|---|---|
| Displacement | 249 cm³ |
| Bore x Stroke | 66.4 mm x 72 mm |
| Starter | Electric starter |
| Transmission | 6-speed |
| Cooling | Liquid cooled |
| Front Suspension | WP XPLOR-USD, Ø 48 mm |
| Front Brake | Disc brake, 260 mm |
| Rear Brake | Disc brake, 220 mm |
| Fuel Tank Capacity | 9 L |
| Ground Clearance | 370 mm |
| Seat Height | 960 mm |
| Rear Suspension | WP XPLOR shock absorber with linkage |
| Frame | Central double-cradle type, Chromium-Molybdenum |
Defines the intended purpose and operational guidelines for the motorcycle.
Provides general safety instructions and emphasizes the importance of reading warnings.
Explains the function and states of the emergency OFF switch for immediate engine shutdown.
Details the meaning and function of various indicator lights on the dashboard.
Offers essential advice and safety precautions for preparing the motorcycle for its initial use.
Details the procedure and guidelines for properly running in the engine to ensure its longevity.
Lists critical pre-ride checks and maintenance tasks to ensure safe operation.
Explains proper braking techniques, warnings about brake system issues, and surface conditions.
Details how to check the thickness and condition of the front and rear brake discs.
Guides on checking the front brake fluid level and troubleshooting low levels.
Details how to check coolant antifreeze level and overall coolant level in the radiator.
To Next Page
