To Next PageTo Next Page
Need help?Do you have a question about the KTM 250 MXC and is the answer not in the manual?
General| Bore x Stroke | 66.4 mm x 72 mm |
|---|---|
| Fuel System | Carburetor |
| Transmission | 6-speed |
| Front Brake | Disc |
| Rear Brake | Disc |
| Front Suspension | WP USD |
| Rear Suspension | Mono shock |
| Fuel Capacity | 9.5 L |
| Dry Weight | 98 kg |
| Starter | Kick |
| Frame | Chromoly steel |
| Engine | Single-cylinder, two-stroke |
Instructions for safety, failure to comply can endanger life.
Instructions for caution, failure to comply can cause damage or road unsafety.
Explains the purpose and content of the owner's handbook for operation and maintenance.
Recommends following run-in, inspection, and maintenance intervals for longevity.
Emphasizes responsible riding to prevent environmental issues and conflicts.
Location of the chassis number stamped on the steering head tube.
Location of the engine number and type below the engine sprocket.
Location of the engine number and type on the engine front of the kickstarter.
Description of the clutch lever's location and adjustment screw.
Location and function of the hand brake lever, with a warning about spongy feel.
Lists essential checks (oil, fuel, chain, tires, brakes, cables, coolant, electrics, luggage) before riding.
Advice for first rides, including familiarization, control adjustment, and safe riding practices.
Details the break-in procedure for the engine's first 500 km/5 hours.
How to adjust the clutch lever position using the adjusting screw.
Procedure for checking and adjusting steering head bearing play.
Procedure for cleaning the air filter, including recommended products.
Information on silencer packing and a warning about the hot exhaust system.
Procedure for cleaning the spark arrestor on specific models.
Details on the original carburetor setting for altitude and fuel.
Advice on adjusting the carburetor, including essential requirements and rules of thumb.
Information on wear of carburetor components and its effects.
Definitions for "Mixture too rich", "Mixture too lean", and "Idling range".
Explanation of engine behavior when the throttle opens.
Advice for protecting the motorcycle from aggressive road salt.
Instructions for putting the motorcycle away for longer periods.
Steps to take before riding after the motorcycle has been stored.
Table listing gasket thicknesses for various components.
Table detailing basic carburetor settings for different models.
Table listing gasket thicknesses for various components.
Table detailing basic carburetor settings for different models.
Table listing gasket thicknesses for various components.
Table detailing basic carburetor settings for different models.
Table listing gasket thicknesses for various components.
Table detailing basic carburetor settings for different models.
