3 WORK
18
3.4 Mounting the seat
W00314-10
– Mount the front of the seat on the collar bushings of the fuel
tank, lower the seat at the rear, and push the seat to the rear.
The holding lugs engage in the recesses at the back.
– Make sure the seat is latched in place correctly.
W00301-10
–
Mount and tighten screw
1
.
Guideline
Screw, seat fixing M6 8 Nm (5.9 lbf ft)
3.5 Removing the fuel tank
Danger
Fire hazard Fuel is highly flammable.
The fuel in the fuel tank expands when warm and can escape if overfilled.
– Do not fuel the vehicle in the vicinity of open flames or lit cigarettes.
– Switch off the engine for refueling.
– Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.
– If any fuel is spilled, wipe it off immediately.
– Observe the specifications for refueling.
To Next Page
Loading...
Need help?
General
