KTM 300 XC TPI 2022 User Manual

7 PREPARING FOR USE
24
Warning
Danger of scalding During motorcycle oper-
ation, the coolant gets very hot and is under
pressure.
– Do not open the radiator, the radiator hoses
or other cooling system components if the
engine or the cooling system are at operat-
ing temperature.
– Allow the cooling system and the engine to
cool down before you open the radiator, the
radiator hoses or other components of the
cooling system.
– In the event of scalding, rinse the area
affected immediately with lukewarm water.
– Change the radiator cap.
M01106-01
– Mount the air filter rain cover.
Air filter rain cover (79006921000)
Info
Observe the fitting instructions for KTM PowerParts.
600868-01
– Clean the chain.
Chain cleaner ( p. 142)
– Mount the steel sprocket.
– Grease the chain.
Universal oil spray ( p. 143)
– Clean the radiator fins.
– Straighten the bent radiator fins carefully.
Condition
Regular use in sand
– Change the piston every 10 operating hours.
7.7 Preparing the vehicle for riding on wet and muddy circuits
M01106-01
– Mount the air filter rain cover.
Air filter rain cover (79006921000)
Info
Observe the fitting instructions for KTM PowerParts.

KTM 300 XC TPI 2022 Specifications

General

Displacement	293.2 cc
Bore x Stroke	72 mm x 72 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Ground Clearance	370 mm
Seat Height	950 mm
ABS	Not available
Engine Type	2-stroke
Fuel System	TPI
Front Suspension	WP XPLOR 48 mm
Rear Suspension	WP XPLOR shock absorber with linkage
Front Brake	260 mm disc
Rear Brake	220 mm disc
Fuel Capacity	9 l
Frame	Central double-cradle type 25CrMo4 steel