What to do if the speedometer, horn, brake light, turn signal, and radiator fan are not working on my KTM Motorcycle?
If the speedometer, horn, brake light, turn signal, and radiator fan are not working on your KTM Motorcycle, the cause may be that fuse 4 is blown. Replace the fuses of individual power consumers.
What to do if the high beam, low beam, parking light, tail light, and license plate lamp are not working on my KTM 350 EXC-F SIX DAYS EU?
If the high beam, low beam, parking light, tail light, and license plate lamp are not working on your KTM Motorcycle, it is possible that fuse 3 is blown. Replace the fuses of individual power consumers.
Why are the speedometer values deleted (time, stop watch, lap times) on my KTM Motorcycle?
If the speedometer values (time, stop watch, lap times) are deleted on your KTM Motorcycle, the battery in the speedometer may be discharged. Change the speedometer battery.
General| Bore x Stroke | 88 mm x 57.5 mm |
|---|---|
| Starter | Electric starter |
| Transmission | 6-speed |
| Front Suspension | WP XPLOR-USD, Ø 48 mm |
| ABS | No |
| Ground Clearance | 370 mm |
| Engine Type | Single cylinder, 4-stroke |
| Displacement | 349.7 cc |
| Cooling | Liquid cooled |
| Rear Suspension | WP XPLOR shock absorber |
| Front Brake | Disc brake |
| Rear Brake | Disc brake |
| Fuel Tank Capacity | 9 liters |
| Fuel System | Electronic fuel injection (EFI) |
Explains the meaning of various symbols used in the manual for clarity.
Describes the typographical formats used throughout the document for consistent communication.
Defines the intended use and operational parameters for the motorcycle models.
Provides essential safety instructions and warnings for operating the vehicle safely.
Explains the different levels of risk and associated warning symbols used in the manual.
Warns against tampering with the vehicle's noise control system and related components.
Details crucial aspects of safe motorcycle operation, including hazards and precautions.
Emphasizes the importance of wearing appropriate protective clothing for rider safety.
Outlines general rules and guidelines to be followed when performing maintenance or repair work.
Addresses environmental considerations and responsible usage of the motorcycle.
Stresses the importance of reading and keeping the owner's manual for proper vehicle operation.
Explains warranty conditions and requirements for maintaining coverage.
Specifies approved operating fluids and auxiliary substances for the motorcycle.
Advises on using genuine or approved spare parts and accessories for safety.
Highlights the importance of timely and correct service for optimal performance and longevity.
Notes that manual figures may depict special equipment and might not show full disassembly.
Provides information on how to get support and find authorized dealers.
Illustrates the front left view of the motorcycle, identifying key components.
Illustrates the rear right view of the motorcycle, identifying key components.
Details the location of the chassis number for vehicle identification.
Explains the location and purpose of the vehicle's type label.
Identifies the location of the key number stamped onto the key connector.
Specifies the location of the engine number on the engine case.
Indicates where the fork part number is stamped on the fork stub.
Specifies the location of the shock absorber part number.
Describes the clutch lever's location, operation, and self-adjusting mechanism.
Explains the hand brake lever's location and function for activating the front brake.
Identifies the throttle grip's location on the handlebar.
Details the kill switch location and its operating states for engine control.
Describes the kill switch location and its operating states for engine control.
Explains the horn button's location and operation for signaling.
Details the light switch's function for controlling headlights and tail lights.
Describes the light switch operation for controlling headlights.
Explains the turn signal switch location and operation for signaling turns.
Details the emergency OFF switch location and its function for ignition control.
Describes the electric starter button location and its function for starting the engine.
Explains the electric starter button location and its function for starting the engine.
Lists and describes the function of various indicator lamps on the dashboard.
Details the indicator lamps specific to SIX DAYS models and their meanings.
Lists indicator lamps relevant to XCF-W models and their functions.
Describes indicator lamps for XCF-W SIX DAYS models and their functions.
Provides instructions on how to safely open the fuel filler cap.
Details the procedure for correctly closing the fuel filler cap.
Explains the idle speed adjusting screw's location and function for controlling engine idle speed.
Identifies the shift lever's location and shows gear positions.
Describes the kick starter's location and its use for starting the engine.
Explains the foot brake lever's location and its use for activating the rear brake.
Details the side stand's location and its use for parking the motorcycle.
Explains the steering lock's location and its function to secure the steering.
Provides step-by-step instructions for locking the motorcycle's steering.
Details the procedure for unlocking the motorcycle's steering.
Covers the speedometer functions and settings for specific European and US models.
Details the speedometer functions and settings specifically for SIXDAYS models.
Offers crucial advice and safety precautions for the initial use of the motorcycle.
Guides on the proper procedure for running in the engine to ensure longevity.
Provides guidance on preparing the motorcycle for various challenging riding environments.
Offers specific preparation steps for riding the motorcycle on dry sandy terrain.
Details preparations needed for riding the motorcycle on wet sandy surfaces.
Outlines necessary preparations for riding in wet and muddy conditions.
Provides advice on preparing the motorcycle for operation in high temperatures at slow speeds.
Offers guidance on preparing the motorcycle for riding in cold or snowy conditions.
Lists essential checks and maintenance tasks before riding the motorcycle.
Explains the correct procedure for starting the motorcycle's engine.
Provides instructions on how to start moving the motorcycle from a standstill.
Details how to shift gears and maintain control while riding.
Explains proper braking techniques and precautions for safe deceleration.
Covers procedures for safely stopping and parking the motorcycle.
Offers guidance on safely transporting the motorcycle.
Provides instructions and safety warnings for refueling the motorcycle.
Presents a detailed schedule of maintenance tasks based on operating hours or time intervals.
Lists additional service tasks that may be performed as per customer request.
Guides on adjusting suspension settings to match the rider's weight for optimal handling.
Explains the concept of compression damping in the shock absorber.
Details how to adjust the low-speed compression damping of the rear shock absorber.
Explains the process for adjusting the high-speed compression damping of the shock absorber.
Guides on how to adjust the rebound damping of the rear shock absorber.
Describes the procedure for measuring the rear wheel's static sag.
Explains how to check the static sag of the rear shock absorber.
Details the method for checking the rear shock absorber's riding sag.
Provides instructions for adjusting the rear shock absorber's spring preload.
Guides on adjusting the riding sag of the rear shock absorber.
Explains how to check the basic suspension settings for the front forks.
Details how to adjust the compression damping on the front forks.
Guides on adjusting the rebound damping on the front forks.
Explains how to adjust the spring preload for the front forks on specific models.
Describes the options for adjusting the handlebar position.
Provides instructions on how to adjust the handlebar position.
Details the procedure for safely lifting the motorcycle using a stand.
Explains how to safely remove the motorcycle from the lift stand.
Guides on bleeding air or excess pressure from the front fork legs.
Provides instructions for cleaning the dust boots on the fork legs.
Explains how to loosen and remove the fork protector.
Details the steps for correctly positioning and mounting the fork protector.
Guides on the procedure for removing the front fork legs.
Provides instructions for installing the front fork legs correctly.
Explains how to remove the fork protector.
Details the steps for installing the fork protector.
Guides on removing the lower triple clamp for specific motorcycle models.
Explains the procedure for removing the lower triple clamp on SIXDAYS models.
Provides instructions for installing the lower triple clamp on specific motorcycle models.
Details the procedure for installing the lower triple clamp on SIXDAYS models.
Explains how to check for play in the steering head bearing.
Guides on adjusting steering head bearing play for specific models.
Provides instructions for adjusting steering head bearing play on SIXDAYS models.
Details the procedure for greasing the steering head bearing.
Explains how to remove the front fender.
Provides instructions for installing the front fender.
Guides on the procedure for removing the rear shock absorber.
Details how to install the rear shock absorber correctly.
Explains how to remove the motorcycle seat.
Provides instructions for mounting the motorcycle seat.
Guides on removing the air filter box lid.
Details the procedure for installing the air filter box lid.
Explains how to remove the air filter from the air filter box.
Provides instructions for installing the air filter correctly.
Guides on cleaning the air filter and its housing.
Details how to properly seal the air filter box.
Explains the procedure for removing the main silencer.
Provides instructions for installing the main silencer.
Guides on replacing the glass fiber yarn filling in the main silencer.
Details the procedure for removing the fuel tank.
Provides instructions for installing the fuel tank correctly.
Explains how to check the drive chain for excessive dirt.
Guides on the proper method for cleaning the drive chain.
Details how to check the drive chain tension for proper operation.
Provides instructions for adjusting the drive chain tension.
Explains how to check the condition of the drive chain, sprockets, and guide.
Guides on checking the motorcycle frame for cracks or deformation.
Details how to inspect the swingarm for damage or deformation.
Explains how to check the routing of the throttle cables.
Guides on inspecting the rubber grips for damage or wear.
Provides instructions for additionally securing the rubber grips with wire.
Explains how to adjust the clutch lever's position for rider comfort.
Guides on checking and correcting the hydraulic clutch fluid level.
Details the procedure for changing the hydraulic clutch fluid.
Explains how to remove the engine guard on specific models.
Provides instructions for installing the engine guard on specific models.
Explains how to check the free travel of the front brake lever.
Guides on adjusting the free travel of the front brake lever for specific models.
Details how to adjust the basic position of the front brake lever for specific models.
Explains how to check the thickness and condition of the brake discs.
Guides on checking the brake fluid level in the front brake reservoir.
Provides instructions for adding front brake fluid.
Explains how to check the minimum thickness of the front brake linings.
Details the procedure for changing the front brake linings.
Guides on checking the free travel of the rear brake lever.
Explains how to adjust the basic position of the rear brake lever.
Guides on checking the brake fluid level in the rear brake reservoir.
Provides instructions for adding rear brake fluid.
Explains how to check the minimum thickness of the rear brake linings.
Details the procedure for changing the rear brake linings.
Guides on the procedure for removing the front wheel.
Provides instructions for correctly installing the front wheel.
Details the procedure for removing the rear wheel.
Explains how to correctly install the rear wheel.
Guides on inspecting the tires for cuts, damage, and tread depth.
Provides instructions for checking and correcting tire air pressure.
Explains how to check and adjust spoke tension for wheel balance.
Details the procedure for safely removing the motorcycle battery.
Provides instructions for correctly installing the motorcycle battery.
Guides on the proper method for charging the motorcycle battery.
Explains how to locate and replace the main fuse.
Guides on locating and replacing fuses for individual electrical components.
Details how to remove the headlight mask and headlight assembly.
Explains how to check the correct aim of the headlight.
Provides instructions on how to adjust the headlight's beam range.
Guides on reinstalling the headlight mask and headlight assembly.
Explains how to replace the headlight bulb.
Details how to change a turn signal bulb.
Guides on replacing the battery in the speedometer unit.
Briefly explains how the cooling system circulates coolant and manages engine temperature.
Guides on checking the coolant's antifreeze level and overall level.
Details how to check the coolant level in the radiator.
Provides instructions for draining the coolant from the system.
Guides on the procedure for refilling the cooling system with coolant.
Explains how to check the throttle cable for correct free play.
Provides instructions for adjusting the throttle cable's free play.
Guides on how to adjust the engine's idle speed.
Explains how to check the shift lever's basic riding position.
Provides instructions for adjusting the shift lever's basic riding position.
Guides on how to change the fuel filter screen.
Explains how to check the engine oil level.
Details the process for changing engine oil, filter, and cleaning the oil screen.
Provides instructions for adding engine oil to the correct level.
Offers guidelines for washing and cleaning the motorcycle.
Outlines checks and maintenance procedures for preparing the motorcycle for winter storage.
Provides instructions for preparing and storing the motorcycle for extended periods.
Details the steps required to get the motorcycle ready for use after storage.
Lists detailed technical specifications for the motorcycle's engine.
Provides a table of tightening torques for various engine components.
Lists the fluid capacities for engine oil, coolant, and fuel.
Specifies the type and quantity of engine oil required.
Details the type and quantity of coolant needed for the cooling system.
Lists the fuel tank capacity and recommended fuel type.
Provides technical data related to the motorcycle's chassis components.
Lists technical specifications for the motorcycle's electrical system components.
Details tire specifications and validity information.
Lists technical data and adjustment settings for the front fork.
Specific fork technical data and adjustment settings for certain models.
Specific fork technical data and adjustment settings for SIXDAYS models.
Lists technical data and adjustment settings for the rear shock absorber.
Provides a table of tightening torques for various chassis components.
Details specifications and recommendations for brake fluid.
Specifies coolant types, mixture ratios, and protection levels.
Lists ready-to-use coolant specifications.
Details specifications for engine oil suitable for demanding conditions.
Specifies the standard recommended engine oil type and grade.
Lists the type and specifications for fork oil.
Specifies the type and specifications for shock absorber oil.
Details the recommended fuel grade and ethanol content.
Recommends specific products for cleaning the air filter.
Recommends specific products for cleaning the drive chain.
Recommends products for cleaning and preserving various motorcycle parts.
Recommends specific fuel additives for use.
Recommends specific high-viscosity greases for lubrication.
Recommends specific long-life greases for lubrication.
Recommends specific motorcycle cleaning products.
Recommends specific chain sprays for off-road use.
Recommends specific oils for foam air filters.
Recommends products for cleaning and polishing motorcycle surfaces.
Specifies adhesive for securing rubber grips.
Recommends specific universal oil sprays.
Explains the JASO T903 MA standard for motorcycle engine oils.
Explains the SAE classification system for oil viscosity.
To Next Page