Need help?Do you have a question about the KTM 390 ADVENTURE 2022 and is the answer not in the manual?
General| Displacement | 373.2 cc |
|---|---|
| Bore x Stroke | 89 mm x 60 mm |
| Power | 32 kW (43 hp) @ 9, 000 rpm |
| Torque | 37 Nm @ 7, 000 rpm |
| Compression Ratio | 12.6:1 |
| Transmission | 6-speed |
| Fuel System | Electronic fuel injection |
| Cooling | Liquid-cooled |
| Clutch | PASC slipper clutch, mechanically operated |
| Frame | Steel trellis frame, powder-coated |
| Rear Suspension | WP APEX Monoshock |
| Rear Brake | 230 mm disc, single-piston floating caliper |
| Front Tire | 100/90-19 |
| Rear Tire | 130/80-17 |
| Front Wheel | 2.50 x 19" |
| Wheelbase | 1, 430 mm |
| Seat Height | 855 mm |
| Ground Clearance | 200 mm |
| Dry Weight | 172 kg |
| Instrumentation | TFT display |
| Headlight | LED |
| Turn Indicators | LED |
| Engine Type | Single-cylinder, 4-stroke |
| Front Suspension | WP APEX 43 |
| Front Brake | 320 mm disc |
| ABS | Bosch 9.1 MP |
| Rear Wheel | 17 inch |
| Fuel Tank Capacity | 14.5 liters |
| Traction Control | Yes |
| Ride Modes | Street, Offroad |
Explains the meaning of various symbols used throughout the manual.
Explains the typographical formats used in the document.
Enabling vehicle electronics for operation after transport.
Location of the diagnostics connector under the passenger seat.
Steps for unpacking the vehicle and removing packaging materials.
Positioning and securing the handlebar and clamps.
Correct attachment of the front brake line and outer clutch cable.
Positioning controls and mounting the windshield.
Procedure to check and ensure correct clutch lever play.
Steps for removing and installing the passenger and rider seats.
Procedures for filling, charging, and installing the 12V battery.
Removing remaining packaging, refueling, and checking headlight setting.
Preparing the vehicle according to KTM Dealer.net specifications.
Checking and adjusting the clutch lever play.
Instructions for removing and mounting the passenger seat.
Instructions for removing and mounting the front rider seat.
Procedure for charging the 12V battery for optimal service life.
Procedure for safely disconnecting the 12V battery negative cable.
Procedure for safely connecting the 12V battery negative cable.
Steps for correctly installing the 12V battery in the compartment.
Procedure to set the current time and date on the motorcycle display.
Procedures for opening and closing the fuel tank filler cap.
Safe refueling instructions and fuel specifications.
Checking the headlight setting for correct beam alignment.
Adjusting the motorcycle's headlight range.
Specifications for tightening torques of various chassis components.
Information on recommended fuel types and ethanol content.
To Next Page