SET‑UP 4
800035-10
Warning
Risk of injury Battery acid and battery gases cause serious chemical burns.
– Keep batteries out of the reach of children.
– Wear suitable protective clothing and goggles.
– Avoid contact with battery acid and battery gases.
– Keep the battery away from sparks or open fire. Charge only in well-
ventilated rooms.
– In the event of skin contact, rinse with large amounts of water. If battery
acid gets in the eyes, rinse with water for at least 15 minutes and con-
tact a physician.
– Fill the battery.
Info
Read the notes in the battery package.
– Recharge the battery. ( p. 6)
– Install the battery. ( p. 6)
– Install the front fender. ( p. 7)
(EXC AUS, EXC SIX DAYS)
– Fit the engine guard.
Info
Read the accompanying KTM PowerParts installation instructions.
800041-10
– Fit the frame protector.
Info
Read the accompanying KTM PowerParts installation instructions.
(all EXC models)
– Mount and tighten the rear mirror adapter and rear mirror on both sides.
– Position all operating elements exactly on the handlebar. Tighten all screws.
– Mount the reflector.
(EXC AUS, EXC SIX DAYS, XC‑W USA)
– Fit the hand guard.
Info
Read the accompanying KTM PowerParts installation instructions.
(EXC SIX DAYS)
– Fit the handlebar cushion.
– Fill up with fuel. ( p. 8)
– Print out the current PDI form found on KTM DEALER.NET and perform the delivery
inspection.
To Next Page
Loading...
Need help?
General
