ENGLISH
19
VITAL CHECKS AND CARE PROCEDURES TO BE CONDUCTED BY THE OWNER OR THE MECHANIC
Check oil level ●
Check brake fluid level ●
Check brake pads for wear ●
Check lighting system for proper operation ●
Check horn for proper operation ●
Lubricate and adjust actuating cables and nipples ●
Bleed fork legs in regular intervals ●
Remove and clean fork dust sleeves in regular intervals ●
Clean and lubricate chain as necessary ●●
Check chain tension ●●●
Clean air filter and filter box (depending on the dirt accumulation) ●
Check tire pressure and wear ●
Check coolant level ●
Check fuel lines for leaks ●
Drain float chamber ●
Check all control elements for smooth running. ●
Check brake performance ●●
Treat exposed metal components (except for the braking and exhaust ●
systems) with wax-based anti-corrosion agents
Treat ignition/steering lock and light switch with contact spray ●
Check all screws, nuts, and hose clamps for their tight fit ●
once a yearfor cross
country use
after every
cleaning
before each
start
PERIODIC MAINTENANCE SCHEDULE
640 LC4
640 LC4 SUPERMOTO
To Next Page