KTM 950 ADVENTURE - Chassis Tightening Torques

ENGLISH
49
TECHNICAL SPECIFICATIONS – CHASSIS »
TIGHTENING TORQUES – CHASSIS
HH clamp bolts on top triple clamp M8 20 Nm
HH clamp bolts for steering stem M8 20 Nm
HH clamp bolts on bottom triple clamp M8 15 Nm
AH bolt for handlebar mount M10 20 Nm
Collar bolts for handlebar clamps M8 20 Nm
HH clamp bolts on fork leg axle passages M8 15 Nm
Collar screw on front wheel spindle M24x1.5 60 Nm
Collar nut wheel spindle rear M25x1.5 90 Nm
Collar nut for swing arm bolt M19x1.5 130 Nm
AH screw shock absorber top M14x1.5 80 Nm
AH bolt shock absorber bottom M14x1.5 80 Nm
AH bolt for top of brake-hose guide M6 Loctite 243 + 8 Nm
HH bolts on front brake caliper M8 Loctite 243 + 25 Nm
HH bolts on footbrake cylinder M6 Loctite 243 + 10 Nm
Collar bolt front brake disk M6 Loctite 243 + 14 Nm
Collar bolt rear brake disks M6 Loctite 243 + 14 Nm
AH bearing bolt for foot brake pedal M8 Loctite 243 + 25 Nm
HH bolts on foot brake pedal surface M5 Loctite 243 + 6 Nm
AH bolts on subframe M10x1.25 Loctite 243 + 45 Nm
AH bolts on back of footrest support M8 Loctite 243 + 25 Nm
AH bolts on tank cover M5 5 Nm
HH bolt on fuel level indicator M5 3 Nm
HH bolts fuel taps M6 6 Nm
AH bolts on tank mounting M8 25 Nm
Exhaust nuts on manifold M8 evenly, do not bend sheet metal
HH bolts on exhaust suspension M6 Loctite 243 + 12 Nm
Spoke nipple M5 5 Nm ± 1 Nm
HH nuts on rear sprocket bolts M10x1.25 Loctite 243 + 50 Nm
Hexagon nut on engine sprocket M20x1.5 sheet retainer + 100 Nm
Engine carrier bolts M10 45 Nm
HH bolts for side stand bracket - engine M10 Loctite 243 + 45 Nm
HH bolts side stand bracket - side stand console M10 Loctite 243 + 25 Nm
HH bolts side stand mounting M10 Loctite 243 + 35 Nm
HH bolt spring retainer side stand M8 Loctite 243 + 25 Nm
HH bolt side stand switch M6 Loctite 243 + 10 Nm
HH bolts for underride protection M8 Loctite 243 + 25 Nm
Drain plug on oil tank M12x1.5 25 Nm
Other bolts on chassis M6 10 Nm
M8 25 Nm
M10 45 Nm
Other collar nuts on chassis M6 15 Nm
M8 30 Nm
M10 50 Nm