What to do if KTM 990 Adventure 2009 engine does not turn when starter button is pressed?
If the KTM Motorcycle engine doesn't turn when you press the starter, it could be due to an operating error. Make sure to follow the correct start procedure. Alternatively, the battery might be discharged, in which case you should recharge it.
Why does my KTM Motorcycle engine only turn if the clutch lever is drawn?
The KTM Motorcycle engine might only turn when the clutch lever is drawn because the vehicle is in gear. To resolve this, shift the transmission to neutral.
General| Engine Type | V-twin, 4-stroke |
|---|---|
| Displacement | 999 cc |
| Bore x Stroke | 101 x 62.4 mm |
| Compression Ratio | 11.5:1 |
| Cooling system | Liquid cooled |
| Transmission | 6-speed |
| ABS | Optional |
| Front Tire | 90/90-21 |
| Rear Tire | 150/70-18 |
| Torque | 100 Nm |
| Fuel System | Electronic Fuel Injection |
| Frame | Chromium-Molybdenum steel trellis |
| Front Suspension | WP USD 48 mm, fully adjustable |
| Rear Suspension | WP monoshock |
| Rear Brake | Single 240 mm disc |
| Seat Height | 860 mm (33.9 in) |
| Wheelbase | 1, 570 mm |
Emphasizes compliance with maintenance schedules for fault-free operation and longevity.
Recommends using only approved parts and installation by authorized KTM workshops.
Defines risk levels (Danger, Warning, Caution, Note) for user safety information.
Locates the ignition and steering lock and describes its possible states (OFF, ON, Locked).
Provides an overview of the combination instrument, its function areas, and components.
Offers crucial safety warnings and advice for initial vehicle operation.
Provides guidelines for engine speed and load during the initial running-in period.
Lists essential checks to ensure the motorcycle is in perfect technical condition before riding.
Covers safety precautions related to engine starting and exhaust gases.
Offers safety warnings and guidance on proper braking techniques and conditions.
Provides detailed instructions and safety warnings related to filling the fuel tank.
Lists essential maintenance tasks requiring an authorized KTM workshop.
Explains how to adjust the hydraulic compression damping of the front fork.
Explains the function, operation, and warnings related to the ABS system.
Guides on replacing the fuses for the ABS hydraulic unit and control unit.
Provides instructions and warnings for checking the coolant level in the expansion tank.
Guides on how to check the engine oil level using the dipstick.
Provides instructions and specifications for adding engine oil to the correct level.
Lists possible causes and actions for the engine not starting.
Provides troubleshooting steps for engine overheating issues.
To Next Page