What to do if my KTM Motorcycle engine stalls while driving?
If your KTM Motorcycle engine stalls while driving, it could be due to two main reasons: either you're out of fuel, so you need to refuel, or the fuse for the fuel pump (fuse 4) has blown and needs to be replaced.
Why is my KTM 990 SUPER DUKE, 990 SUPER DUKE R Motorcycle engine overheating?
If your KTM Motorcycle engine overheats, first check if the cooling liquid level is sufficient and refill if necessary, also inspect the cooling system for any leaks. Ensure the radiator fins are clean by washing the radiator with a water jet. If foam is forming in the cooling system, replace the cooling liquid with an antifreeze of a known brand. Inspect the radiator hose for kinks or damage; correct the hose's routing or replace it if needed. Finally, have the thermostat checked to ensure it opens at the correct temperature (75°C).
What causes my KTM Motorcycle engine to overheat?
If your KTM Motorcycle engine is overheating, a blown fan fuse could be the cause. Replace fuse 5. Alternatively, there might be a defect with the fan or thermoswitch for the fan, which requires contacting an authorized KTM workshop. Air in the cooling system can also cause overheating; bleed the cooling system.
Why won't my KTM 990 SUPER DUKE, 990 SUPER DUKE R engine reach full power?
If your KTM Motorcycle engine will not reach full power, the air filter or fuel filter might be heavily soiled. In this case, have the air filter or fuel filter replaced at an authorized KTM workshop. Also, an error in the injection system can cause this issue, requiring a visit to an authorized KTM workshop.
What does it mean if the FI lamp is blinking on my KTM 990 SUPER DUKE, 990 SUPER DUKE R?
If the FI lamp on your KTM Motorcycle is blinking or lit up, it indicates an error in the injection system. You should visit an authorized KTM workshop to address this issue.
What causes high oil consumption in my KTM 990 SUPER DUKE, 990 SUPER DUKE R Motorcycle?
If you notice high oil consumption in your KTM Motorcycle, it could be due to the engine oil level being too high. Check the engine oil level when the engine is warm and correct it if necessary. Alternatively, the engine oil might be too thin (viscosity). Use a thicker engine oil.
How to fix headlight and position light failure on my KTM 990 SUPER DUKE, 990 SUPER DUKE R Motorcycle?
If the headlight and position light fail on your KTM Motorcycle, the fuse may be blown. Replace fuse 2.
Why are the flasher lights, brake light, horn, and combined instrument failing on my KTM 990 SUPER DUKE, 990 SUPER DUKE R?
If the flasher lights, brake light, horn, and combined instrument fail on your KTM Motorcycle, the fuse may be blown. Replace fuse 3.
What to do if the time is not displayed correctly on my KTM Motorcycle?
If the time is not displayed or not correctly displayed on your KTM Motorcycle, it is because the fuse is blown, thus there is no continuous power supply. Replace fuse 6 and set the clock.
General| Brand | KTM |
|---|---|
| Model | 990 SUPER DUKE, 990 SUPER DUKE R |
| Category | Motorcycle |
| Language | English |
Specifies intended use, emphasizes manual reading, and highlights service importance.
Covers warranty, fluids, spare parts, and environmental considerations.
Locates and describes how to find the chassis and engine identification numbers.
Explains clutch, brake levers, switches, and pedals for motorcycle operation.
Details the combined instrument, its parts, function buttons, and various display modes.
Guides on adjusting fork and shock absorber settings for ride comfort and performance.
Provides instructions for first rides, break-in, safety gear, and tire care.
Advises on mounting accessories and managing payload to maintain stability.
Lists essential checks before starting and provides engine starting steps.
Explains gear shifting, riding, braking, and stopping procedures.
Covers fuel requirements, tank filling, and parking procedures.
Outlines scheduled maintenance for engine, chassis, brakes, and wheels.
Lists periodic maintenance for wheels, and vital owner checks.
Covers chassis/engine cautions, suspension tuning, and fork/shock absorber adjustments.
Details chain maintenance, brake system info, fluid changes, and disc wear.
Discusses wheel removal/installation, tire pressure, and battery maintenance.
Covers electrical components, cooling system, and clutch adjustments.
Provides instructions for changing engine oil, oil filter, and cleaning the oil screen.
Addresses problems with engine starting, power, and overheating.
Covers issues with lights, instruments, battery, and diagnostic blink codes.
Guides on regular cleaning, paint care, and preserving the motorcycle for winter.
Details long-term storage guidelines and steps for starting after immobilization.
Lists technical details for the motorcycle's chassis, frame, suspension, brakes, and tires.
Provides technical data for the engine, including displacement, fuel, oil, and cooling system.
Covers reporting safety defects, noise emission warranty, and tampering warnings.
To Next Page