SETUP 2
13
Info
Read the accompanying KTM PowerParts fitting instruc-
tions.
– Attach the stickers included in the scope of supply (optional).
– Refuel. ( p. 23)
– Position all controls in their exact positions on the handlebar.
Tighten all screws.
– Remove the remaining films, padding, the corrugated card-
board, and the other packaging material.
– Prepare the vehicle according to the specifications in
KTM Dealer.net for handover to the customer.
Info
Transport mode must be deactivated to be able to start
the motorcycle.
To Next Page
Loading...
