3 WORK
20
311910-10
Main work
– Connect a battery charger to the 12-V battery. Adjust the bat-
tery charger.
EU battery charger XCharge‑professional (00029095050)
Alternative 1
US battery charger XCharge‑professional
(00029095051)
Alternative 2
UK battery charger XCharge‑professional
(00029095052)
Alternative 3
CH battery charger XCharge‑professional
(00029095053)
Info
Follow the instructions of the charger and the manual.
– Disconnect the battery charger after charging the 12-V battery.
Guideline
The charging current, charging voltage, and charging time
must not be exceeded.
Recharge the 12-V battery
regularly when the motorcy-
cle is not being used
3 months
Finishing work
– Connect the negative cable of the 12-V battery. ( p. 21)
– Mount the seat. ( p. 17)
3.11 Disconnecting the negative cable of the 12-V battery
Preparatory work
– Press and hold the switch-off button while the engine is
idling until the engine stops.
– Remove the seat. ( p. 16)
R01414-10
Main work
–
Disconnect negative cable
1
of the 12-V battery.
To Next Page
