KTM SX-E 5 2021 - Page 99

KTM SX-E 5 2021

109 pages

Save Page as PDF

To Next Page

To Next Page

To Previous Page

To Previous Page

Loading...

TECHNICAL DATA 21

97

Screw, handlebar support M10 40 Nm (29.5 lbf ft)

Loctite

®

243™

Screw, top shock absorber M10 45 Nm (33.2 lbf ft)

Loctite

®

243™

Nut, rear wheel spindle M12x1 40 Nm (29.5 lbf ft)

Nut, swingarm pivot M12x1 45 Nm (33.2 lbf ft)

Nut, steering head M20x1.5 10 Nm (7.4 lbf ft)

Table of Contents

Default Chapter4
- Table of Contents4
1 Means of Representation 17
- Symbols Used7
- Formats Used7
2 Safety Advice8
- Use Definition - Intended Use8
- Misuse8
- Notes/Warnings8
- Grades of Risks8
- Tampering Warning8
- Safe Operation9
- Fall or Accident10
- Protective Clothing10
- Work on Vehicle, Motor, and Rechargeable Lithium-Ion Battery10
- Environment10
- Owner's Manual11
- Fire Hazard11
3 Important Notes12
- Manufacturer Warranty, Implied Warranty12
- Fuel, Auxiliary Substances12
- Spare Parts, Accessories12
- Service12
- Figures12
- Customer Service12
- Power Supply13
- Operation at Low Temperatures13
4 View of Vehicle14
- View of Vehicle, Front Left (Example)14
- View of Vehicle, Rear Right (Example)15
5 Serial Numbers16
- Vehicle Identification Number16
- Type Label16
- Motor Number16
- Fork Part Number16
- Shock Absorber Article Number17
- Battery Identification Number17
6 Controls18
- Hand Brake Lever18
- Throttle Grip18
- On/Off Button18
- Magnetic Switch on Handlebar18
- Magnetic Switch under the Seat19
- Foot Brake Lever19
- Plug-In Stand20
- Diagnostics Connector20
7 Multifunctional Element 721
- Ride Mode Button21
- Ride Mode Display22
- Malfunction Indicator Lamp22
- Charging Level Indicator22
- Power Reduction23
8 Preparing for Use24
- Advice on Preparing for First Use24
9 Riding Instructions26
- Checks and Maintenance Measures When Preparing for Use26
- Starting the Vehicle26
- Starting off27
- Applying the Brakes27
- Recuperation28
- Stop, Park28
- Transporting29
10 Service Schedule30
- Additional Information30
- Required Work30
- Recommended Work31
11 Suspension Setting32
- Checking the Basic Chassis Setting with the Rider's Weight32
- Air Suspension XACT 523532
- Compression Damping of the Shock Absorber33
- Adjusting the Low-Speed Compression Damping of the Shock Absorber33
- Adjusting the High-Speed Compression Damping of the Shock Absorber34
- Adjusting the Rebound Damping of the Shock Absorber34
- Measuring the Dimension of the Rear Wheel Unloaded35
- Checking the Static Sag of the Shock Absorber35
- Checking the Riding Sag of the Shock Absorber36
- Adjusting the Spring Preload of the Shock Absorber36
- Adjusting the Riding Sag37
- Checking the Basic Setting of the Fork38
- Adjusting the Fork Air Pressure38
- Adjusting the Rebound Damping of the Fork39
- Handlebar Position40
- Adjusting the Handlebar Position40
12 Seat Height42
- Seat Height Adjustment Options42
- Adjusting the Seat Height on the Shock Absorber42
- Adjusting the Seat Height on the Fork43
- Adjusting the Seat Height on the Frame44
13 Service Work on the Chassis 1347
- Raising the Motorcycle with a Lift Stand47
- Removing the Motorcycle from the Lift Stand47
- Bleeding the Fork Legs47
- Cleaning the Dust Boots of the Fork Legs48
- Removing the Fork Protector48
- Installing the Fork Protector49
- Removing the Fork Legs49
- Installing the Fork Legs49
- Removing the Lower Triple Clamp50
- Installing the Lower Triple Clamp51
- Checking the Steering Head Bearing Play53
- Adjusting the Steering Head Bearing Play54
- Lubricating the Steering Head Bearing54
- Removing the Start Number Plate54
- Installing the Start Number Plate55
- Removing Front Fender55
- Installing Front Fender55
- Removing the Shock Absorber56
- Installing the Shock Absorber56
- Removing the Seat57
- Mounting the Seat57
- Checking the Chain for Dirt57
- Cleaning the Chain58
- Checking the Chain Tension58
- Adjusting the Chain Tension59
- Checking the Chain, Rear Sprocket, Motor Sprocket, and Chain Guide60
- Adjusting the Chain Guide62
- Checking the Frame62
- Checking the Link Fork62
- Checking the Rubber Grip63
14 Brake System64
- Checking Play of Handbrake Lever64
- Adjusting the Play of the Hand Brake Lever64
- Adjusting the Basic Position of the Hand Brake Lever64
- Checking the Brake Discs65
- Checking the Front Brake Fluid Level66
- Adding Front Brake Fluid67
- Checking the Front Brake Linings68
- Changing the Brake Linings of the Front Brake68
- Checking the Free Travel of the Foot Brake Lever71
- Adjusting the Free Travel of the Foot Brake Lever71
- Adjusting the Basic Position of the Foot Brake Lever72
- Checking the Rear Brake Fluid Level73
- Adding Rear Brake Fluid73
- Checking the Brake Linings of the Rear Brake74
- Changing the Rear Brake Linings75
15 Wheels, Tires78
- Removing the Front Wheel78
- Installing the Front Wheel78
- Removing the Rear Wheel79
- Installing the Rear Wheel80
- Checking the Tire Condition81
- Checking Tire Pressure82
- Checking Spoke Tension82
16 Powerpack Lv, Battery Charger84
- Overview of Battery Charger84
- Positioning the Battery Charger84
- Charging the Powerpack LV85
17 Cooling 1789
18 Cleaning, Care90
- Cleaning the Motorcycle90
19 Storage92
- Preparing for Use after Storage92
20 Troubleshooting 2093
21 Technical Data 2195
- Engine95
- Chassis95
- Electrical System96
- Tires96
- Fork96
- Shock Absorber97
- Chassis Tightening Torques97
22 Substances100
23 Auxiliary Substances 23101
24 Standards102
25 Index of Special Terms 25103
26 List of Abbreviations104
27 List of Symbols 27105
- Yellow and Orange Symbols105
- Index106

Related product manuals

Preview: KTM SX-E 5

KTM SX-E 3 2024

Preview: KTM Freeride E-SX

KTM Freeride E-SX

Preview: KTM 50 SX

Preview: KTM 65 SX

Preview: KTM 85 SX

Preview: KTM 250 SX

Preview: KTM 250 SX-F

Preview: KTM 350 SX-F

Preview: KTM 450 SX-F

Preview: KTM 125 SX EU