Kubota BX24 Workshop Manual

423 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

BX24,LA240,BT601,RCK54,

RCK54P,RCK60B

WORKSHOP MANUAL

TRACTOR,FRONT LOADER,

BACKHOE,ROTARY MOWER

KiSC issued 08, 2019 A

Table of Contents

Other manuals for Kubota BX24

Operator's Manual128 pages

Questions and Answers:

M
Michael SalazarAug 20, 2025
What to do if my Kubota Tractor engine overheats?
- L
  louisdawsonAug 21, 2025
  If your Kubota Tractor engine is overheating, start by checking the engine oil and coolant levels and replenish if insufficient. Inspect the fan belt for damage or improper tension and replace or adjust as needed. Clean any dust or debris from the radiator net and fins. If the inside of the radiator or coolant flow route is corroded, clean or replace them. A defective radiator cap or damaged radiator hose should also be replaced. Avoid overload running by reducing the load. A defective head gasket should be replaced, and incorrect injection timing should be adjusted. Ensure you are using the specified fuel.
J
jacksonjenniferAug 23, 2025
Why is my Kubota BX24 Tractor emitting black or dark gray exhaust gas?
- D
  Daniel KruegerAug 23, 2025
  If your Kubota Tractor is emitting black or dark gray exhaust gas, it could be due to several reasons. You might be overloading the tractor, so reduce the load. Ensure you are using the specified fuel, as low-grade fuel can cause this issue. Check the fuel filter and air cleaner for clogs, replacing or cleaning them as necessary. Lastly, a deficient nozzle injection may be the culprit, requiring you to repair or replace the nozzle.
T
Tammy HarrisonAug 26, 2025
What to do if the starter does not run on my Kubota Tractor?
- A
  Alvin ChurchAug 26, 2025
  If the starter on your Kubota Tractor isn't running, the battery may be discharged, requiring a charge. The starter itself, the main switch, or the safety switches may be malfunctioning, needing repair, replacement, or adjustment. Also, check for disconnected wiring and connect it.
H
Heather GonzalezAug 28, 2025
Why is the engine revolution not smooth on my Kubota BX24?
- J
  James CaseyAug 28, 2025
  An uneven engine revolution in your Kubota Tractor can stem from several issues. A clogged or dirty fuel filter should be replaced. A clogged air cleaner should be cleaned or replaced. Ensure the injection pipe retaining nut is tightened to prevent fuel leaks. A malfunctioning injection pump should be replaced. Issues with the nozzle, such as incorrect injection pressure (adjust it) or being stuck/clogged (repair or replace), can also cause this. Lastly, a malfunctioning governor may require repair.
J
Joyce RamseyAug 30, 2025
What causes deficient output in a Kubota Tractor?
- G
  gallowaykimAug 30, 2025
  Deficient output in your Kubota Tractor can arise from several causes. Incorrect injection timing should be adjusted. If the engine’s moving parts seem to be seizing, they should be repaired or replaced. Uneven fuel injection requires replacing the injection pump. Deficient nozzle injection requires repair or replacement of the nozzle. A compression leak requires replacing the head gasket and tightening the cylinder head screws, glow plug, and nozzle holder.
K
Kelly CampbellSep 2, 2025
Why is my Kubota BX24 Tractor emitting white or blue exhaust gas?
- J
  Jerry EstradaSep 2, 2025
  If your Kubota Tractor is emitting white or blue exhaust gas, it could be due to several reasons. Excessive engine oil should be reduced to the specified level. Worn or stuck piston rings and cylinders should be repaired or replaced. Incorrect injection timing should be adjusted. Check for deficient compression.
C
Christina RogersSep 5, 2025
How to fix low oil pressure in my Kubota BX24?
- K
  Kimberly JosephSep 5, 2025
  If your Kubota Tractor has low oil pressure, first ensure the engine oil level is sufficient and replenish if needed. A clogged oil strainer or oil filter should be cleaned or replaced, respectively. A relief valve stuck with dirt should be cleaned, and a relief valve spring that is weakened or broken should be replaced. Excessive oil clearance in various components like the crankshaft bearing, crankpin bearing, or rocker arm requires replacement. A clogged oil passage should be cleaned. Using a different type of oil requires switching to the specified type. Lastly, a defective oil pump should be repaired or replaced.
A
Angela StephensSep 7, 2025
What causes excessive lubricant oil consumption in a Kubota BX24 Tractor?
- A
  Austin CastanedaSep 7, 2025
  Excessive lubricant oil consumption in your Kubota Tractor can be caused by the piston ring’s gap facing the same direction (shift ring gap direction), a worn or stuck oil ring (replace it), a worn piston ring groove (replace the piston), worn valve stem and valve guide (replace them), or oil leaking due to defective seals or packing (replace them).
D
Desiree SchmidtSep 9, 2025
Why is fuel mixing into the lubricant oil of my Kubota BX24 Tractor?
- O
  oeatonSep 9, 2025
  If fuel is mixing into the lubricant oil of your Kubota Tractor, it could be due to a worn injection pump’s plunger (repair or replace), deficient nozzle injection (repair or replace nozzle), or a broken injection pump (replace).

Kubota BX24 Specifications

General

Engine Power	23 hp (17.2 kW)
Transmission Type	Hydrostatic
Brakes	Wet disc
Power Steering	Yes
Rear PTO	540 RPM
Hydraulic System Type	Open center
3-Point Hitch	Category I
Engine Type	Diesel
Wheelbase	55.1 inches
Width	44.5 inches
Height	85.4 inches
PTO Power	17.7 hp
Gears	2-range (Hi/Lo)

Related product manuals

Preview: Kubota BX23S

Preview: Kubota BX2380

Preview: Kubota BX2350

Preview: Kubota BX2360

Preview: Kubota BX2370

Preview: Kubota BX231D

Preview: Kubota BX25DLB-AU

Kubota BX25DLB-AU