Name: Kubota BX2670
Brand: Kubota
Rating: 4 (1 reviews)

To Next Page

To Previous Page

28 PTO

PTO

PTO OPERATION

To avoid personal injury:

A Before operation, be sure to select the position

of the PTO select lever (mid, mid/rear, rear).

To avoid personal injury:

A Disengage PTO, stop engine, and allow all

rotating components to come to a complete

stop before connecting, disconnecting,

adjusting, or cleaning any PTO driven

equipment.

BPTO Select Lever

The tractor has a 540 rpm rear PTO speed and a 2500

rpm mid-PTO speed.

C Mid-PTO

To use Mid-PTO, shift the PTO select lever to Mid-PTO

position and the PTO clutch lever to "ON" position.

C Mid-Rear PTO

To use mid and rear PTO at the same time, shift the PTO

select lever to mid-rear PTO position and the PTO clutch

lever to "ON" position.

C Rear PTO

To use rear PTO, shift the PTO select lever to rear PTO

position and the PTO clutch lever to "ON" position.

A To avoid shock loads to the PTO, reduce engine

throttle from full to half speed by pushing up on engine

throttle when engaging the PTO, then open the throttle

to the recommended speed.

A To avoid damage of transmission, when PTO select

lever is not smoothly shifted, slightly shift PTO clutch

lever.

C Mid-PTO

The Mid-PTO is available for KUBOTA approved

implements.

(1) PTO select lever (A) Mid-PTO position

(B) Mid-Rear-PTO position

(1) Mid-PTO

Other manuals for Kubota BX2670

Questions and Answers:

Need help?

Do you have a question about the Kubota BX2670 and is the answer not in the manual?

General