Kubota BX2680 User Manual

Consult your KUBOTA Dealer regarding maintenance,
diagnosis, and repair.
12. Checking the movable parts
1.
If any of the movable parts, such as levers and
pedals,
is not smoothly moved because of rust or
sticky material, remove the rust or the sticky
material, and apply oil or grease on the relevant
spot.
Do not force the movable parts into motion.
Otherwise, the machine may get damaged.
SERVICE EVERY 50 HOURS
1. Lubricate fittings with grease
Apply a small amount of multipurpose grease to the
following points every 50 hours.
If you
operated the machine in extremely wet and
muddy conditions, lubricate grease fittings more often.
Apply grease between rod and hole.
DAILY CHECK PERIODIC SERVICE
BX1880, BX2380, BX2680
79

Kubota BX2680 Specifications

General

Engine Type	Diesel
Engine Model	Kubota D1005
Engine Power	25.5 HP
Transmission Type	Hydrostatic
Drive	4WD
Front Axle	Bevel gear
Steering	Power Steering
Brakes	Wet disc
Hydraulic System Type	Open center
Hydraulic Pump Capacity	6.2 GPM
3-Point Hitch	Category I
3-Point Hitch Lift Capacity at 24 inches	680 lbs
Fuel Capacity	6.6 gallons
Wheelbase	55.1 inches
Length	95.5 inches
PTO Power	19.5 HP
Number of Gears	3-range
Tire Size (Front)	18x8.5-10
Tire Size (Rear)	26x12-12