Kubota M100GX - Page 3

Record of Revisions
For pdf, use search function {Search word} to find all the revised locations.
Last digit
of the
Code No.
Issue
month
Main Revised Point and Corrective Measures {Search word}
Reference
Page
2 2014.07 • Correct specifications
• Adding the informations (DPF regeneration system of Default
Version)
• Adding the information (When reassembling)
• Correcting the tightening torque
• Correcting tightening torque
• Correcting tightening torque
• Correcting the flow rate
• Correcting the relief pressure
• Correcting the clearance
• Correcting errors of DTC (Diagnostic Trouble Code)
• Adding the informations
• Correcting errors
• Adding Tightening torque
I-21, I-22,
I-26
1-M42
2-S47,
7-S17
2-S50
3-S3
3-S5
7-S3, 7-S6,
7-S8,
7-S10
7-S4,
7-S10
7-S26
8-S12,
8-S16
8-S17
8-S100,
8-S101,
8-S102,
8-S103,
8-S104
9-S8,
9-S55
3 2015.03 • Changing the title from "M100GX, M110GX, M126GX, M135GX,
M135GX-FS" to "M100GX, M110GX, M126GX, M128GX,
M128GX-FS, M135GX, M135GX-FS"
• Adding M100GX, M128GX, M128GX-FS for Europe
• Adding the maintenance for Europe
–
4 2015.07 • Balancer shaft bearing replacing tool changed. G-122,
G-124,
G-125,
G-126,
1-S145
5 2015.11 • Wrong Correction
The topic "Adjusting Air Conditioner Belt Tension [M100GX,
M110GX]" was moved to [4] CHECK POINTS OF EVERY 100
HOURS from [5] CHECK POINTS OF EVERY 200 HOURS G-31
• Wrong Correction
Rated pressure for hydraulic flow test was corrected.
7-S3,
7-S4,
7-S6,
7-S8
• Wrong Correction
Engine speed as a condition for checking relief valve setting
pressure was corrected.
7-S4,
7-S10
KiSC issued 03, 2016 A