7-S3
M6800 · M6800S · M8200 · M9000, WSM
STEERING
3. TIGHTENING TORQUES
Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts : Refer to “6. TIGHTENING TORQUES” at GENERAL Section.)
W1012736
Item N·m kgf·m ft-lbs
Hydraulic pipe mounting screw
Hydraulic pump assembly mounting screw and nut
Housing cover mounting nut
Main delivery pipe and return pipe retaining nut
Power steering hose retaining nut
Turning delivery hose retaining nut
Steering controller mounting screw
Gerotor assembly mounting screw (5/16’)
Tie-rod end slotted nut [2WD]
Tie-rod end slotted nut [4WD]
Steering cylinder bracket mounting screw [4WD]
Steering cylinder mounting nut [2WD]
Steering cylinder mounting lock nut [2WD]
Guide assembly
Cylinder cover mounting screw
Cylinder bracket mounting screw
Tie-rod joint lock nut
17.7 to 20.6
23.5 to 27.5
39.2 to 44.1
47.1 to 51.0
24.5 to 29.4
24.5 to 29.4
48.1 to 55.9
25.5 to 28.4
77.5 to 90.2
156.9 to 176.5
123.6 to 147.1
34.3 to 39.2
39.2 to 45.1
142.2 to 152.0
48.1 to 55.9
123.6 to 147.1
166.7 to 196.1
1.8 to 2.1
2.4 to 2.8
4.0 to 4.5
4.8 to 5.2
2.5 to 3.0
2.5 to 3.0
4.9 to 5.7
2.6 to 2.9
7.9 to 9.2
16.0 to 18.0
12.6 to 15.0
3.5 to 4.0
4.0 to 4.6
14.5 to 15.5
4.9 to 5.7
12.6 to 15.0
17.0 to 20.0
13.0 to 15.2
17.4 to 20.3
28.9 to 32.5
34.7 to 37.6
18.1 to 21.7
18.1 to 21.7
35.4 to 41.2
18.8 to 21.0
57.1 to 66.5
115.7 to 130.2
91.1 to 108.5
25.3 to 28.9
28.9 to 33.3
104.9 to 112.1
35.4 to 41.2
91.1 to 108.5
123.0 to 144.7
To Next Page
Loading...
Need help?
General
