To Next Page
P
paul24Aug 28, 2025
How to record input of headland management system on Kubota M7-172?
- MMegan RivasAug 28, 2025
When programming the headland management system on your Kubota Tractor, push the recording button again and operate the tractor.
How to record input of headland management system on Kubota M7-172?
When programming the headland management system on your Kubota Tractor, push the recording button again and operate the tractor.
What to do if Kubota M7-172 shows communication error of ECU?
If you experience a communication error of ECU on your Kubota Tractor, check the fuse and wiring of ECU. If there is no damage, contact your dealer.
Why Kubota M7-172 Tractor shows operational error when handbrake is applied?
If the handbrake is applied, release it to resolve the operational error on your Kubota Tractor.
What causes signal error with external switch for front 3-point hitch lowering on Kubota Tractor?
Check if the external switch for front 3-point hitch lowering is stuck on your Kubota Tractor. If not, contact your dealer.
What to do if Kubota M7-172 shows communication error of TCU?
If you experience a communication error of TCU on your Kubota Tractor, check the fuse and wiring of TCU. If there is no damage, contact your dealer.
What causes signal error with external switch for 3-point hitch lifting on Kubota M7-172 Tractor?
Check if the external switch for 3-point hitch lifting is stuck on your Kubota Tractor. If not, contact your dealer.
What causes signal error with front PTO switch on Kubota M7-172 Tractor?
Check if the front PTO switch is stuck on your Kubota Tractor. If the message persists after the switch is released, contact your dealer.
What to do if Kubota Tractor has no GPS signal?
If your Kubota Tractor shows 'No GPS signal', wait for the GPS signal to be acquired.
What to do when Kubota M7-172 shows GPS signal error?
If you are experiencing a GPS signal error with your Kubota Tractor, wait for the GPS signal to be acquired.
How to fix GPS setting error on Kubota M7-172?
If you encounter a GPS setting error with your Kubota Tractor, double-check the GPS settings.
General| Engine Power | 172 hp |
|---|---|
| Hydraulic System | Open Center |
| PTO Speed | 540/1000 rpm |
| Tire Size (Front) | 480/70R28 |
| Tire Size (Rear) | 600/70R38 |
| Engine Type | 4-cylinder, Turbocharged |
| Number of Gears | 24 forward / 24 reverse |
| Hydraulic Flow | 29.1 gpm |
| Hydraulic Pump Capacity | 29.1 gpm |
| PTO Power | 140 hp |
| Fuel Tank Capacity | 300 L |
| Width | 2, 550 mm |
General safety precautions and guidelines for operating the tractor.
Recommendations and safety for using the CAB and ROPS.
General advice on operating the tractor safely.
Precautions and procedures for safely starting the tractor engine.
Safe operating procedures and guidelines for working with the tractor.
Safety precautions related to children around the tractor.
Safety advice for operating the tractor on slopes to prevent accidents.
Safety rules for driving the tractor on public roads.
Identification and location of various switches and hand controls.
Details of foot and hand controls within the operator's station.
Description of the Intellipanel instrument panel.
Explanation of the LCD display functions and information.
Guide to the K-monitor main menu for specific models.
Routine daily inspections for tractor safety and maintenance.
Information on the DPF muffler and its handling.
Step-by-step guide for auto DPF regeneration.
Understanding PM warnings and required actions for DPF.
Guide for operating the tractor in regeneration inhibit mode.
Steps for performing parked DPF regeneration.
Information about the SCR system and its components.
Warnings and actions for DEF/AdBlue® system issues.
Detailed table of SCR system warnings, status, and required measures.
Procedures for starting the engine in cold weather conditions.
Procedures for properly shutting down the engine.
Procedures for warming up the engine before operation.
Instructions for safely jump-starting the tractor's battery.
Explanation of the key switch positions and their functions.
Specific procedures for breaking in a new tractor.
Safe practices for getting on and off the tractor.
Adjustments and features of the operator's position.
How to adjust the operator's seat for comfort and safety.
How the OPC system functions to stop PTO and activate warnings.
Importance and use of the seat belt.
How to adjust the steering wheel.
How to operate the tractor's lights.
General information about tractor lights.
Operation of the light switch without repeat headlight.
Operation of the light switch with repeat headlight.
Operation of turn signals and hazard lights.
How to operate the work lights.
How to operate the tractor's brake systems.
Operation and safety of the foot brake pedals.
Procedures for applying and releasing the parking brake.
How trailer brakes are activated and their importance.
Checking trailer brake connectors for proper function.
Connecting and using hydraulic trailer brakes.
Connecting and using pneumatic trailer brakes.
How to control the tractor's movement.
Operation and safety of the clutch pedal.
Using the hand throttle to control engine speed.
Using the foot throttle for speed control on roads.
How to operate the shuttle lever for forward/reverse travel.
Using the shuttle button to switch travel direction.
Returning the transmission to neutral using the shuttle neutral button.
Operation of the 4WD and AUTO 4WD switches.
Choosing the appropriate 4WD mode for different jobs.
How to switch between different 4WD modes.
How to use the differential lock for traction.
Selecting the correct differential lock mode.
How to switch between different differential lock modes.
Switching between manual and auto shift modes.
Switching between road and field auto shift modes.
Information on traveling speeds for different modes.
Setting traveling speed gears for road mode.
Setting main gear shift ranges for field mode.
Setting range gear shifts for field mode.
Setting traveling speed ranges for road mode on Premium models.
Setting main gear shift ranges for field mode on Premium models.
Setting range gear shifts for field mode on Premium models.
How to operate the tractor in manual mode.
How to operate the main gear shift without clutch.
How to operate the range gear shift for traveling speeds.
Adjusting auto shift sensitivity for gear shifting.
Using the limp home switch for emergency escape.
Basic operation of the tractor while traveling with CVT.
How to use the main shift control for speed adjustment.
Switching between high and low speed modes.
How to use the automatic mode for traveling and towing.
Using manual engine speed for PTO-driven implements.
Adjusting CVT sensitivity for different operating modes.
Adjusting CVT response for start/stop and load conditions.
How to set and use the cruise control function.
Using the limp home switch for emergency escape.
Checks to perform while driving the tractor.
Understanding the engine over-speed indicator.
Warning indicators for gear shifting issues.
Interpreting indicators and warnings from the Easy Checker™.
Troubleshooting engine control system errors.
Identifying and addressing engine overheating.
Checking engine oil pressure warnings.
Interpreting master system warnings.
Troubleshooting system abnormalities.
Parking brake warning indicator.
Brake oil pressure warning.
Trailer brake warning indicator.
Warnings related to the DEF/AdBlue® system.
How to read and use the fuel gauge.
How to read and use the DEF/AdBlue® gauge.
How to read the coolant temperature gauge.
How to read the tachometer for engine speed.
Information on the headland management system.
How to program the headland management system.
How to load programs into the headland management system.
Procedures for using the headland management system.
Explanation of the different front suspension modes (Auto, Block, Manual).
How to switch between front suspension modes.
Procedures for safely parking the tractor.
How to operate the tractor effectively in various conditions.
Safe operating procedures for road travel.
Safety advice for operating on slopes and rough ground.
How to use the power steering system.
Daily inspections before operating the tractor.
Troubleshooting electric control system issues.
